80-drivers.rules 0000644 00000001147 15144730601 0007527 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION!="add", GOTO="drivers_end"
ENV{MODALIAS}=="?*", RUN{builtin}+="kmod load $env{MODALIAS}"
SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", RUN{builtin}+="kmod load tifm_sd"
SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", RUN{builtin}+="kmod load tifm_ms"
SUBSYSTEM=="memstick", RUN{builtin}+="kmod load ms_block mspro_block"
SUBSYSTEM=="i2o", RUN{builtin}+="kmod load i2o_block"
SUBSYSTEM=="module", KERNEL=="parport_pc", RUN{builtin}+="kmod load ppdev"
KERNEL=="mtd*ro", ENV{MTD_FTL}=="smartmedia", RUN{builtin}+="kmod load sm_ftl"
LABEL="drivers_end"
65-libwacom.rules 0000644 00000002211 15144730601 0007642 0 ustar 00 # udev rules for libwacom supported devices
ACTION!="add|change", GOTO="libwacom_end"
KERNEL!="event[0-9]*", GOTO="libwacom_end"
# HUION and GAOMON consumer and system control devices are not tablets.
ATTRS{name}=="* Consumer Control", GOTO="libwacom_end"
ATTRS{name}=="* System Control", GOTO="libwacom_end"
# Match all serial wacom tablets with a serial ID starting with WACf
ENV{ID_BUS}=="tty|pnp", ATTRS{id}=="WACf*", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1", GOTO="libwacom_end"
ENV{ID_BUS}=="tty|pnp", ATTRS{id}=="FUJ*", ENV{ID_INPUT}="1", ENV{ID_INPUT_TABLET}="1", GOTO="libwacom_end"
# use the /sys/class/input/eventXXX/device/modalias as lookup key, prefixed
# by libwacom:<device name>:
# This lookup key is a contract between the udev rules and the hwdb entries.
# It is not considered public API and may change.
KERNELS=="input*", \
IMPORT{builtin}="hwdb --subsystem=input '--lookup-prefix=libwacom:name:$attr{name}:'"
# We can't unset properties through the hwdb but we can set them to zero.
# So let's have a rule that converts the 0 properties to unset ones.
ENV{ID_INPUT_JOYSTICK}=="0", ENV{ID_INPUT_JOYSTICK}=""
LABEL="libwacom_end"
99-vmware-scsi-udev.rules 0000644 00000000713 15144730601 0011262 0 ustar 00 # Copyright (C) 2016,2019 VMware, Inc. All rights reserved.
#
# This file is part of open-vm-tools
ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="Virtual disk*", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys$env{DEVPATH}/device/timeout'"
ACTION=="add", SUBSYSTEMS=="scsi", ATTRS{vendor}=="VMware*", ATTRS{model}=="VMware Virtual S", ENV{DEVTYPE}=="disk", RUN+="/bin/sh -c 'echo 180 >/sys$env{DEVPATH}/device/timeout'"
40-redhat.rules 0000644 00000003452 15144730601 0007315 0 ustar 00 # do not edit this file, it will be overwritten on update
# CPU hotadd request
SUBSYSTEM=="cpu", ACTION=="add", TEST=="online", ATTR{online}=="0", ATTR{online}="1"
# Memory hotadd request
SUBSYSTEM!="memory", GOTO="memory_hotplug_end"
ACTION!="add", GOTO="memory_hotplug_end"
CONST{arch}=="s390*", GOTO="memory_hotplug_end"
CONST{arch}=="ppc64*", GOTO="memory_hotplug_end"
ENV{.state}="online"
CONST{virt}=="none", ENV{.state}="online_movable"
ATTR{state}=="offline", ATTR{state}="$env{.state}"
LABEL="memory_hotplug_end"
# reload sysctl.conf / sysctl.conf.d settings when the bridge module is loaded
ACTION=="add", SUBSYSTEM=="module", KERNEL=="bridge", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/proc/sys/net/bridge"
# load SCSI generic (sg) driver
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_target", TEST!="[module/sg]", RUN+="/sbin/modprobe -bv sg"
# Rule for prandom character device node permissions
KERNEL=="prandom", MODE="0644"
# Rules for creating the ID_PATH for SCSI devices based on the CCW bus
# using the form: ccw-<BUS_ID>-zfcp-<WWPN>:<LUN>
#
ACTION=="remove", GOTO="zfcp_scsi_device_end"
#
# Set environment variable "ID_ZFCP_BUS" to "1" if the devices
# (both disk and partition) are SCSI devices based on FCP devices
#
KERNEL=="sd*", SUBSYSTEMS=="ccw", DRIVERS=="zfcp", ENV{.ID_ZFCP_BUS}="1"
# For SCSI disks
KERNEL=="sd*[!0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}"
# For partitions on a SCSI disk
KERNEL=="sd*[0-9]", SUBSYSTEMS=="scsi", ENV{.ID_ZFCP_BUS}=="1", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/ccw-$attr{hba_id}-zfcp-$attr{wwpn}:$attr{fcp_lun}-part%n"
LABEL="zfcp_scsi_device_end"
99-systemd.rules 0000644 00000010417 15144730601 0007553 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="systemd_end"
SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*|ttysclp*|sclp_line*|3270/tty[0-9]*", TAG+="systemd"
KERNEL=="vport*", TAG+="systemd"
SUBSYSTEM=="ubi", TAG+="systemd"
SUBSYSTEM=="block", TAG+="systemd"
SUBSYSTEM=="block", ACTION=="add", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
# Ignore encrypted devices with no identified superblock on it, since
# we are probably still calling mke2fs or mkswap on it.
SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
# add symlink to GPT root disk
SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}!="crypto_LUKS", SYMLINK+="gpt-auto-root"
SUBSYSTEM=="block", ENV{ID_PART_GPT_AUTO_ROOT}=="1", ENV{ID_FS_TYPE}=="crypto_LUKS", SYMLINK+="gpt-auto-root-luks"
SUBSYSTEM=="block", ENV{DM_UUID}=="CRYPT-*", ENV{DM_NAME}=="root", SYMLINK+="gpt-auto-root"
# Ignore raid devices that are not yet assembled and started
SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", TEST!="md/array_state", ENV{SYSTEMD_READY}="0"
SUBSYSTEM=="block", ENV{DEVTYPE}=="disk", KERNEL=="md*", ATTR{md/array_state}=="|clear|inactive", ENV{SYSTEMD_READY}="0"
# Ignore loop devices that don't have any file attached
SUBSYSTEM=="block", KERNEL=="loop[0-9]*", ENV{DEVTYPE}=="disk", TEST!="loop/backing_file", ENV{SYSTEMD_READY}="0"
# Ignore nbd devices until the PID file exists (which signals a connected device)
SUBSYSTEM=="block", KERNEL=="nbd*", ENV{DEVTYPE}=="disk", TEST!="pid", ENV{SYSTEMD_READY}="0"
# We need a hardware independent way to identify network devices. We
# use the /sys/subsystem/ path for this. Kernel "bus" and "class" names
# should be treated as one namespace, like udev handles it. This is mostly
# just an identification string for systemd, so whether the path actually is
# accessible or not does not matter as long as it is unique and in the
# filesystem namespace.
#
# http://cgit.freedesktop.org/systemd/systemd/tree/src/libudev/libudev-enumerate.c#n955
SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/net/devices/$name"
SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}+="/sys/subsystem/bluetooth/devices/%k"
SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}+="bluetooth.target"
ENV{ID_SMARTCARD_READER}=="?*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="smartcard.target"
SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sound.target"
SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}+="printer.target"
# Apply sysctl variables to network devices (and only to those) as they appear.
ACTION=="add", SUBSYSTEM=="net", KERNEL!="lo", RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/ipv4/conf/$name --prefix=/net/ipv4/neigh/$name --prefix=/net/ipv6/conf/$name --prefix=/net/ipv6/neigh/$name"
# Pull in backlight save/restore for all backlight devices and
# keyboard backlights
SUBSYSTEM=="backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@backlight:$name.service"
SUBSYSTEM=="leds", KERNEL=="*kbd_backlight", TAG+="systemd", IMPORT{builtin}="path_id", ENV{SYSTEMD_WANTS}+="systemd-backlight@leds:$name.service"
# Pull in rfkill save/restore for all rfkill devices
SUBSYSTEM=="rfkill", ENV{SYSTEMD_RFKILL}="1"
SUBSYSTEM=="rfkill", IMPORT{builtin}="path_id"
SUBSYSTEM=="misc", KERNEL=="rfkill", TAG+="systemd", ENV{SYSTEMD_WANTS}+="systemd-rfkill.socket"
# Asynchronously mount file systems implemented by these modules as soon as they are loaded.
SUBSYSTEM=="module", KERNEL=="fuse", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-fs-fuse-connections.mount"
SUBSYSTEM=="module", KERNEL=="configfs", TAG+="systemd", ENV{SYSTEMD_WANTS}+="sys-kernel-config.mount"
LABEL="systemd_end"
99-nfs.rules 0000644 00000000137 15144730601 0006647 0 ustar 00 SUBSYSTEM=="bdi", ACTION=="add", PROGRAM="/usr/libexec/nfsrahead %k", ATTR{read_ahead_kb}="%c"
63-md-raid-arrays.rules 0000644 00000005107 15144730601 0010666 0 ustar 00 # do not edit this file, it will be overwritten on update
SUBSYSTEM!="block", GOTO="md_end"
# handle md arrays
ACTION=="remove", GOTO="md_end"
KERNEL!="md*", GOTO="md_end"
# partitions have no md/{array_state,metadata_version}, but should not
# for that reason be ignored.
ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
# container devices have a metadata version of e.g. 'external:ddf' and
# never leave state 'inactive'
ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
TEST!="md/array_state", ENV{SYSTEMD_READY}="0", GOTO="md_end"
ATTR{md/array_state}=="clear*|inactive", ENV{SYSTEMD_READY}="0", GOTO="md_end"
ATTR{md/sync_action}=="reshape", ENV{RESHAPE_ACTIVE}="yes"
LABEL="md_ignore_state"
IMPORT{program}="/usr/sbin/mdadm --detail --no-devices --export $devnode"
ENV{DEVTYPE}=="disk", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}", OPTIONS+="string_escape=replace"
ENV{DEVTYPE}=="disk", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}"
ENV{DEVTYPE}=="disk", ENV{MD_DEVNAME}=="?*", SYMLINK+="md/$env{MD_DEVNAME}"
ENV{DEVTYPE}=="partition", ENV{MD_NAME}=="?*", SYMLINK+="disk/by-id/md-name-$env{MD_NAME}-part%n", OPTIONS+="string_escape=replace"
ENV{DEVTYPE}=="partition", ENV{MD_UUID}=="?*", SYMLINK+="disk/by-id/md-uuid-$env{MD_UUID}-part%n"
ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[^0-9]", SYMLINK+="md/$env{MD_DEVNAME}%n"
ENV{DEVTYPE}=="partition", ENV{MD_DEVNAME}=="*[0-9]", SYMLINK+="md/$env{MD_DEVNAME}p%n"
IMPORT{builtin}="blkid"
OPTIONS+="link_priority=100"
OPTIONS+="watch"
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
ENV{MD_LEVEL}=="raid[1-9]*", ENV{SYSTEMD_WANTS}+="mdmonitor.service"
# Tell systemd to run mdmon for our container, if we need it.
ENV{MD_LEVEL}=="raid[1-9]*", ENV{MD_CONTAINER}=="?*", PROGRAM="/usr/bin/readlink $env{MD_CONTAINER}", ENV{MD_MON_THIS}="%c"
ENV{MD_MON_THIS}=="?*", TEST=="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@initrd-%c.service"
ENV{MD_MON_THIS}=="?*", TEST!="/etc/initrd-release", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdmon@%c.service"
ENV{RESHAPE_ACTIVE}=="yes", PROGRAM="/usr/bin/basename $env{MD_MON_THIS}", ENV{SYSTEMD_WANTS}+="mdadm-grow-continue@%c.service"
LABEL="md_end"
01-md-raid-creating.rules 0000644 00000000501 15144730601 0011142 0 ustar 00 # do not edit this file, it will be overwritten on update
# While mdadm is creating an array, it creates a file
# /run/mdadm/creating-mdXXX. If that file exists, then
# the array is not "ready" and we should make sure the
# content is ignored.
KERNEL=="md*", TEST=="/run/mdadm/creating-$kernel", ENV{SYSTEMD_READY}="0"
70-joystick.rules 0000644 00000000660 15144730601 0007706 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="joystick_end"
ENV{ID_INPUT_JOYSTICK}=="", GOTO="joystick_end"
KERNEL!="event*", GOTO="joystick_end"
# joystick:<bustype>:v<vid>p<pid>:name:<name>:*
KERNELS=="input*", ENV{ID_BUS}!="", \
IMPORT{builtin}="hwdb 'joystick:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
GOTO="joystick_end"
LABEL="joystick_end"
60-persistent-input.rules 0000644 00000005226 15144730601 0011406 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="persistent_input_end"
SUBSYSTEM!="input", GOTO="persistent_input_end"
SUBSYSTEMS=="bluetooth", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
# Bluetooth devices don't always have the bluetooth subsystem
ATTRS{id/bustype}=="0005", ENV{ID_BUS}="bluetooth", GOTO="persistent_input_end"
SUBSYSTEMS=="rmi4", ENV{ID_BUS}="rmi"
SUBSYSTEMS=="serio", ENV{ID_BUS}="i8042"
SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id"
# determine class name for persistent symlinks
ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd"
ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse"
ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse"
ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse"
ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick"
DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr"
ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir"
# fill empty serial number
ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
# by-id links
KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}"
KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}"
KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="|00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}"
KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}"
# allow empty class for USB devices, by appending the interface number
SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \
SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}"
# by-path
SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id"
ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}"
ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}"
# allow empty class for platform and usb devices; platform supports only a single interface that way
SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \
SYMLINK+="input/by-path/$env{ID_PATH}-event"
LABEL="persistent_input_end"
60-persistent-storage-tape.rules 0000644 00000003164 15144730601 0012641 0 ustar 00 # do not edit this file, it will be overwritten on update
# persistent storage links: /dev/tape/{by-id,by-path}
ACTION=="remove", GOTO="persistent_storage_tape_end"
ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_tape_end"
# type 8 devices are "Medium Changers"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \
SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{builtin}="path_id", \
SYMLINK+="tape/by-path/$env{ID_PATH}-changer"
SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end"
KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394"
KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id"
KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi"
KERNEL=="st*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
# by-path (parent device path)
KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id"
KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst"
LABEL="persistent_storage_tape_end"
60-net.rules 0000644 00000000201 15144730601 0006623 0 ustar 00 ACTION=="add", SUBSYSTEM=="net", DRIVERS=="?*", ATTR{type}=="1", PROGRAM="/lib/udev/rename_device", RESULT=="?*", NAME="$result"
60-sensor.rules 0000644 00000001327 15144730601 0007360 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="sensor_end"
# device matching the sensor's name and the machine's DMI data for IIO devices
SUBSYSTEM=="iio", KERNEL=="iio*", SUBSYSTEMS=="usb|i2c", \
IMPORT{builtin}="hwdb 'sensor:modalias:$attr{modalias}:$attr{[dmi/id]modalias}'", \
GOTO="sensor_end"
SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="acpi", \
IMPORT{builtin}="hwdb 'sensor:modalias:acpi:$attr{hid}:$attr{[dmi/id]modalias}'", \
GOTO="sensor_end"
SUBSYSTEM=="input", ENV{ID_INPUT_ACCELEROMETER}=="1", SUBSYSTEMS=="platform", \
IMPORT{builtin}="hwdb 'sensor:modalias:platform:$id:$attr{[dmi/id]modalias}'", \
GOTO="sensor_end"
LABEL="sensor_end"
78-sound-card.rules 0000644 00000011320 15144730601 0010111 0 ustar 00 # do not edit this file, it will be overwritten on update
SUBSYSTEM!="sound", GOTO="sound_end"
ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
ACTION!="change", GOTO="sound_end"
# Ok, we probably need a little explanation here for what the two lines above
# are good for.
#
# The story goes like this: when ALSA registers a new sound card it emits a
# series of 'add' events to userspace, for the main card device and for all the
# child device nodes that belong to it. udev relays those to applications,
# however only maintains the order between father and child, but not between
# the siblings. The control device node creation can be used as synchronization
# point. All other devices that belong to a card are created in the kernel
# before it. However unfortunately due to the fact that siblings are forwarded
# out of order by udev this fact is lost to applications.
#
# OTOH before an application can open a device it needs to make sure that all
# its device nodes are completely created and set up.
#
# As a workaround for this issue we have added the udev rule above which will
# generate a 'change' event on the main card device from the 'add' event of the
# card's control device. Due to the ordering semantics of udev this event will
# only be relayed after all child devices have finished processing properly.
# When an application needs to listen for appearing devices it can hence look
# for 'change' events only, and ignore the actual 'add' events.
#
# When the application is initialized at the same time as a device is plugged
# in it may need to figure out if the 'change' event has already been triggered
# or not for a card. To find that out we store the flag environment variable
# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
# event has already been processed.
KERNEL!="card*", GOTO="sound_end"
ENV{SOUND_INITIALIZED}="1"
IMPORT{builtin}="hwdb"
SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
SUBSYSTEMS=="usb", GOTO="skip_pci"
SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", \
ENV{ID_BUS}="firewire", ENV{ID_SERIAL}="$attr{guid}", ENV{ID_SERIAL_SHORT}="$attr{guid}", \
ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{model}", \
ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
SUBSYSTEMS=="firewire", GOTO="skip_pci"
SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
SUBSYSTEMS=="pci", GOTO="skip_pci"
# If we reach here, the device nor any of its parents are USB/PCI/firewire bus devices.
# If we now find a parent that is a platform device, assume that we're working with
# an internal sound card.
SUBSYSTEMS=="platform", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
LABEL="skip_pci"
# Define ID_ID if ID_BUS and ID_SERIAL are set. This will work for both
# USB and firewire.
ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}"
IMPORT{builtin}="path_id"
# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
# in sync with those defined for PulseAudio's src/pulse/proplist.h
# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
# Identify cards on the internal PCI bus as internal
SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
# Devices that also support Image/Video interfaces are most likely webcams
SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
# Matching on the model strings is a bit ugly, I admit
ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
LABEL="sound_end"
90-nm-thunderbolt.rules 0000644 00000001114 15144730601 0011006 0 ustar 00 # Do not modify this file, it will get overwritten on updates.
# To override or extend the rules place a file in /etc/udev/rules.d
ACTION!="add|change|move", GOTO="nm_thunderbolt_end"
# Load he thunderbolt-net driver if we a device of type thunderbolt_xdomain
# is added.
SUBSYSTEM=="thunderbolt", ENV{DEVTYPE}=="thunderbolt_xdomain", RUN{builtin}+="kmod load thunderbolt-net"
# For all thunderbolt network devices, we want to enable link-local configuration
SUBSYSTEM=="net", ENV{ID_NET_DRIVER}=="thunderbolt-net", ENV{NM_AUTO_DEFAULT_LINK_LOCAL_ONLY}="1"
LABEL="nm_thunderbolt_end"
90-iprutils.rules 0000644 00000000106 15144730601 0007717 0 ustar 00 DRIVERS=="ipr", TAG+="systemd", ENV{SYSTEMD_WANTS}+="iprutils.target"
60-block.rules 0000644 00000001162 15144730601 0007136 0 ustar 00 # do not edit this file, it will be overwritten on update
# enable in-kernel media-presence polling
ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", \
ATTR{parameters/events_dfl_poll_msecs}="2000"
# forward scsi device event to corresponding block device
ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change"
# watch metadata changes, caused by tools closing the device node which was opened for writing
ACTION!="remove", SUBSYSTEM=="block", KERNEL=="loop*|nvme*|sd*|vd*|xvd*|pmem*|mmcblk*|dasd*", OPTIONS+="watch"
60-persistent-storage.rules 0000644 00000014600 15144730601 0011707 0 ustar 00 # do not edit this file, it will be overwritten on update
# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
ACTION=="remove", GOTO="persistent_storage_end"
ENV{UDEV_DISABLE_PERSISTENT_STORAGE_RULES_FLAG}=="1", GOTO="persistent_storage_end"
SUBSYSTEM!="block", GOTO="persistent_storage_end"
KERNEL!="loop*|mmcblk*[0-9]|msblk*[0-9]|mspblk*[0-9]|nvme*|sd*|sr*|vd*|xvd*|bcache*|cciss*|dasd*|ubd*|scm*|pmem*|nbd*", GOTO="persistent_storage_end"
# ignore partitions that span the entire disk
TEST=="whole_disk", GOTO="persistent_storage_end"
# for partitions import parent information
ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
# NVMe
KERNEL=="nvme*[0-9]n*[0-9]", ATTR{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}"
KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{wwid}=="?*", SYMLINK+="disk/by-id/nvme-$attr{wwid}-part%n"
KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{wwid}=="?*", ENV{ID_WWN}="$attr{wwid}"
KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
KERNEL=="nvme*[0-9]n*[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}"
KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{serial}=="?*", ENV{ID_SERIAL_SHORT}="$attr{serial}"
KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ATTRS{model}=="?*", ENV{ID_MODEL}="$attr{model}"
KERNEL=="nvme*[0-9]n*[0-9]p*[0-9]", ENV{DEVTYPE}=="partition", ENV{ID_MODEL}=="?*", ENV{ID_SERIAL_SHORT}=="?*", \
ENV{ID_SERIAL}="$env{ID_MODEL}_$env{ID_SERIAL_SHORT}", SYMLINK+="disk/by-id/nvme-$env{ID_SERIAL}-part%n"
# virtio-blk
KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
# ATA
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode"
# ATAPI devices (SPC-3 or later)
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode"
# Fall back usb_id for USB devices
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
# SCSI devices
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi"
KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss"
KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
# FireWire
KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}"
KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n"
# MMC
KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
KERNEL=="mmcblk[0-9]p[0-9]*", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
# UBI-MTD
SUBSYSTEM=="ubi", KERNEL=="ubi*_*", ATTRS{mtd_num}=="*", SYMLINK+="ubi_mtd%s{mtd_num}_%s{name}"
# Memstick
KERNEL=="msblk[0-9]|mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", \
ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}"
KERNEL=="msblk[0-9]p[0-9]|mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
# by-path
ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id"
KERNEL=="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-boot%n"
KERNEL!="mmcblk[0-9]boot[0-9]", ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
# legacy virtio-pci by-path links (deprecated)
KERNEL=="vd*[!0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}"
KERNEL=="vd*[0-9]", ENV{ID_PATH}=="pci-*", SYMLINK+="disk/by-path/virtio-$env{ID_PATH}-part%n"
# probe filesystem metadata of optical drives which have a media inserted
KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \
IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}"
# single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \
IMPORT{builtin}="blkid --noraid"
# probe filesystem metadata of disks
KERNEL!="sr*", IMPORT{builtin}="blkid"
# by-label/by-uuid links (filesystem metadata)
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
# by-id (World Wide Name)
ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}"
ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n"
# by-partlabel/by-partuuid links (partition metadata)
ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
LABEL="persistent_storage_end"
70-mouse.rules 0000644 00000001336 15144730601 0007200 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="mouse_end"
KERNEL!="event*", GOTO="mouse_end"
ENV{ID_INPUT_MOUSE}=="", GOTO="mouse_end"
# mouse:<subsystem>:v<vid>p<pid>:name:<name>:*
KERNELS=="input*", ENV{ID_BUS}=="usb", \
IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
GOTO="mouse_end"
KERNELS=="input*", ENV{ID_BUS}=="bluetooth", \
IMPORT{builtin}="hwdb 'mouse:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
GOTO="mouse_end"
DRIVERS=="psmouse", SUBSYSTEMS=="serio", \
IMPORT{builtin}="hwdb 'mouse:ps2::name:$attr{device/name}:'", \
GOTO="mouse_end"
LABEL="mouse_end"
70-touchpad.rules 0000644 00000000731 15144730601 0007655 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="touchpad_end"
ENV{ID_INPUT}=="", GOTO="touchpad_end"
ENV{ID_INPUT_TOUCHPAD}=="", GOTO="touchpad_end"
KERNEL!="event*", GOTO="touchpad_end"
# touchpad:<subsystem>:v<vid>p<pid>:name:<name>:*
KERNELS=="input*", ENV{ID_BUS}!="", \
IMPORT{builtin}="hwdb 'touchpad:$env{ID_BUS}:v$attr{id/vendor}p$attr{id/product}:name:$attr{name}:'", \
GOTO="touchpad_end"
LABEL="touchpad_end"
90-wireshark-usbmon.rules 0000644 00000000060 15144730601 0011343 0 ustar 00 SUBSYSTEM=="usbmon", GROUP="usbmon", MODE="640"
60-input-id.rules 0000644 00000000432 15144730601 0007574 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="id_input_end"
SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id"
SUBSYSTEM=="input", IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=id-input:modalias:"
LABEL="id_input_end"
60-drm.rules 0000644 00000000635 15144730601 0006632 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION!="remove", SUBSYSTEM=="drm", SUBSYSTEMS=="pci|usb|platform", IMPORT{builtin}="path_id"
# by-path
ENV{ID_PATH}=="?*", KERNEL=="card*", SYMLINK+="dri/by-path/$env{ID_PATH}-card"
ENV{ID_PATH}=="?*", KERNEL=="controlD*", SYMLINK+="dri/by-path/$env{ID_PATH}-control"
ENV{ID_PATH}=="?*", KERNEL=="renderD*", SYMLINK+="dri/by-path/$env{ID_PATH}-render"
40-elevator.rules 0000644 00000001330 15144730601 0007660 0 ustar 00 # We aren't adding devices skip the elevator check
ACTION!="add", GOTO="sched_out"
SUBSYSTEM!="block", GOTO="sched_out"
ENV{DEVTYPE}!="disk", GOTO="sched_out"
# Technically, dm-multipath can be configured to use an I/O scheduler.
# However, there are races between the 'add' uevent and the linking in
# of the queue/scheduler sysfs file. For now, just skip dm- devices.
KERNEL=="dm-*|md*", GOTO="sched_out"
# Skip bio-based devices, which don't support an I/O scheduler.
ATTR{queue/scheduler}=="none", GOTO="sched_out"
# If elevator= is specified on the kernel command line, change the
# scheduler to the one specified.
IMPORT{cmdline}="elevator"
ENV{elevator}!="", ATTR{queue/scheduler}="$env{elevator}"
LABEL="sched_out" 64-md-raid-assembly.rules 0000644 00000004500 15144730601 0011201 0 ustar 00 # do not edit this file, it will be overwritten on update
# Don't process any events if anaconda is running as anaconda brings up
# raid devices manually
ENV{ANACONDA}=="?*", GOTO="md_inc_end"
# assemble md arrays
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_inc_end"
SUBSYSTEM!="block", GOTO="md_inc_end"
# skip non-initialized devices
ENV{SYSTEMD_READY}=="0", GOTO="md_inc_end"
# handle potential components of arrays (the ones supported by md)
# For member devices which are md/dm devices, we don't need to
# handle add event. Because md/dm devices need to do some init jobs.
# Then the change event happens.
# When adding md/dm devices, ID_FS_TYPE can only be linux_raid_member
# after change event happens.
ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="md_inc"
# "noiswmd" on kernel command line stops mdadm from handling
# "isw" (aka IMSM - Intel RAID).
# "nodmraid" on kernel command line stops mdadm from handling
# "isw" or "ddf".
IMPORT{cmdline}="noiswmd"
IMPORT{cmdline}="nodmraid"
ENV{nodmraid}=="?*", GOTO="md_inc_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", GOTO="md_inc"
ENV{noiswmd}=="?*", GOTO="md_inc_end"
ENV{ID_FS_TYPE}=="isw_raid_member", ACTION!="change", GOTO="md_inc"
GOTO="md_inc_end"
LABEL="md_inc"
# Make sure we don't handle dm devices when some limits are set.
# And linux_raid_member only be set when change/remove event happen.
# So we don't need to consider add event here.
KERNEL=="dm-*", ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="md_inc_end"
KERNEL=="dm-*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="md_inc_end"
KERNEL=="dm-*", ENV{DM_SUSPENDED}=="1", GOTO="md_inc_end"
# Bare disks are ready when add event happens, the raid can be assembled.
ACTION=="change", KERNEL!="dm-*|md*", GOTO="md_inc_end"
# remember you can limit what gets auto/incrementally assembled by
# mdadm.conf(5)'s 'AUTO' and selectively whitelist using 'ARRAY'
ACTION!="remove", IMPORT{program}="/usr/sbin/mdadm --incremental --export $devnode --offroot $env{DEVLINKS}"
ACTION!="remove", ENV{MD_STARTED}=="*unsafe*", ENV{MD_FOREIGN}=="no", ENV{SYSTEMD_WANTS}+="mdadm-last-resort@$env{MD_DEVICE}.timer"
ACTION=="remove", ENV{ID_PATH}=="?*", RUN+="/usr/sbin/mdadm -If $name --path $env{ID_PATH}"
ACTION=="remove", ENV{ID_PATH}!="?*", RUN+="/usr/sbin/mdadm -If $name"
LABEL="md_inc_end"
60-persistent-v4l.rules 0000644 00000001401 15144730601 0010743 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="persistent_v4l_end"
SUBSYSTEM!="video4linux", GOTO="persistent_v4l_end"
ENV{MAJOR}=="", GOTO="persistent_v4l_end"
IMPORT{program}="v4l_id $devnode"
SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
KERNEL=="video*", ENV{ID_SERIAL}=="?*", SYMLINK+="v4l/by-id/$env{ID_BUS}-$env{ID_SERIAL}-video-index$attr{index}"
# check for valid "index" number
TEST!="index", GOTO="persistent_v4l_end"
ATTR{index}!="?*", GOTO="persistent_v4l_end"
IMPORT{builtin}="path_id"
ENV{ID_PATH}=="?*", KERNEL=="video*|vbi*", SYMLINK+="v4l/by-path/$env{ID_PATH}-video-index$attr{index}"
ENV{ID_PATH}=="?*", KERNEL=="audio*", SYMLINK+="v4l/by-path/$env{ID_PATH}-audio-index$attr{index}"
LABEL="persistent_v4l_end"
63-scsi-sg3_symlink.rules 0000644 00000005505 15144730601 0011255 0 ustar 00 # SCSI-ID symlinks for sg3_utils
ACTION=="remove", GOTO="sg3_utils_symlink_end"
SUBSYSTEM!="block", GOTO="sg3_utils_symlink_end"
# Skip symlink generation for multipath
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="sg3_utils_symlink_end"
# Select which identifier to use per default
# 0: vpd page 0x80 identifier
ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}"
ENV{SCSI_IDENT_SERIAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}-part%n"
# NAA identifier (prefix 3)
# 1: IEEE Registered Extended first
ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}"
ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REGEXT}-part%n"
# 2: IEEE Registered
ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}"
ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_REG}-part%n"
# 3: IEEE Extended
ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}"
ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_EXT}-part%n"
# 4: EUI-64 identifer (prefix 2)
ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}"
ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-2$env{SCSI_IDENT_LUN_EUI64}-part%n"
# 5: SCSI name identifier (prefix 8)
ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}"
ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-8$env{SCSI_IDENT_LUN_NAME}-part%n"
# 6: T10 Vendor identifer (prefix 1)
ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}"
ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-1$env{SCSI_IDENT_LUN_T10}-part%n"
# 7: IEEE Locally assigned
ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}"
ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-3$env{SCSI_IDENT_LUN_NAA_LOCAL}-part%n"
# 8: Vendor-specific identifier (prefix 0)
ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}"
ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-id/scsi-0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}-part%n"
LABEL="sg3_utils_symlink_end"
61-scsi-sg3_id.rules 0000644 00000011251 15144730601 0010154 0 ustar 00 # SCSI-ID mappings for sg3_utils
ACTION=="remove", GOTO="sg3_utils_id_end"
SUBSYSTEM!="block", GOTO="sg3_utils_id_end"
# Import values for partitions
ENV{DEVTYPE}=="partition", IMPORT{parent}="SCSI_*", ENV{ID_SCSI}="1"
# SCSI INQUIRY values
# If the 'inquiry' sysfs attribute is present the kernel will already
# have scanned for VPD pages, so if the vpd page attribute is not
# present it is not supported (or deemed unsafe to access).
# Hence we can skip the call to sg_inq and avoid I/O altogether.
# Set 'ID_SCSI_INQUIRY=0' in an earlier udev rule if the kernel
# fails to scan VPD pages correctly; the rules will then fall
# back to calling sg_vpd directly.
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI_INQUIRY}!="?*", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/inquiry --raw", ENV{ID_SCSI}="1", ENV{ID_SCSI_INQUIRY}="1"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}!="1", IMPORT{program}="/usr/bin/sg_inq --export $tempnode", ENV{ID_SCSI}="1"
# scsi_id compat mappings
ENV{SCSI_VENDOR}=="?*", ENV{ID_VENDOR}="$env{SCSI_VENDOR}"
ENV{SCSI_VENDOR_ENC}=="?*", ENV{ID_VENDOR_ENC}="$env{SCSI_VENDOR_ENC}"
ENV{SCSI_MODEL}=="?*", ENV{ID_MODEL}="$env{SCSI_MODEL}"
ENV{SCSI_MODEL_ENC}=="?*", ENV{ID_MODEL_ENC}="$env{SCSI_MODEL_ENC}"
ENV{SCSI_REVISION}=="?*", ENV{ID_REVISION}="$env{SCSI_REVISION}"
ENV{SCSI_TYPE}=="?*", ENV{ID_TYPE}="$env{SCSI_TYPE}"
# SCSI EVPD page 0x80 values
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}=="1", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/vpd_pg80 --raw"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}!="1", IMPORT{program}="/usr/bin/sg_inq --export --page=sn $tempnode"
# SCSI EVPD page 0x83 values
KERNEL=="sd*[!0-9]", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}=="1", IMPORT{program}="/usr/bin/sg_inq --export --inhex=/sys/block/$kernel/device/vpd_pg83 --raw"
KERNEL=="sd*[!0-9]|sr*", ENV{ID_SCSI}=="1", ENV{ID_SCSI_INQUIRY}!="1", IMPORT{program}="/usr/bin/sg_inq --export --page=di $tempnode"
# ID_WWN compat mapping
ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_REGEXT}"
ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_REG}"
ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_EXT}"
ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_WWN}!="?*", ENV{ID_WWN}="0x$env{SCSI_IDENT_LUN_NAA_LOCAL}"
ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_REGEXT}"
ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="0x$env{SCSI_IDENT_LUN_NAA_EXT}"
ENV{ID_WWN}=="?*", ENV{ID_WWN_WITH_EXTENSION}!="?*", ENV{ID_WWN_WITH_EXTENSION}="$env{ID_WWN}"
# ata_id compability
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_ATA}=="?*", ENV{ID_BUS}="ata", ENV{ID_ATA}="1", ENV{ID_SERIAL}="$env{SCSI_IDENT_LUN_ATA}"
ENV{ID_SERIAL_SHORT}!="?*", ENV{SCSI_VENDOR}=="ATA", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}"
# Compat ID_SERIAL setting
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REGEXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REGEXT}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REGEXT}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_REG}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_REG}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_REG}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_EXT}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_EXT}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_EUI64}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="2$env{SCSI_IDENT_LUN_EUI64}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_EUI64}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAME}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="8$env{SCSI_IDENT_LUN_NAME}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAME}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_T10}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="1$env{SCSI_IDENT_LUN_T10}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_T10}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_NAA_LOCAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="3$env{SCSI_IDENT_LUN_NAA_LOCAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_NAA_LOCAL}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_LUN_VENDOR}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="0$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_LUN_VENDOR}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_LUN_VENDOR}"
ENV{ID_SERIAL}!="?*", ENV{SCSI_IDENT_SERIAL}=="?*", ENV{ID_BUS}="scsi", ENV{ID_SERIAL}="S$env{SCSI_VENDOR}_$env{SCSI_MODEL}_$env{SCSI_IDENT_SERIAL}", ENV{ID_SERIAL_SHORT}="$env{SCSI_IDENT_SERIAL}"
LABEL="sg3_utils_id_end"
66-kpartx.rules 0000644 00000002175 15144730601 0007370 0 ustar 00 #
# persistent links for device-mapper devices
# only hardware-backed device-mapper devices (ie multipath, dmraid,
# and kpartx) have meaningful persistent device names
#
KERNEL!="dm-*", GOTO="kpartx_end"
ACTION!="add|change", GOTO="kpartx_end"
ENV{DM_UUID}!="?*", GOTO="kpartx_end"
# Create dm tables for partitions on multipath devices.
ENV{DM_UUID}!="mpath-?*", GOTO="mpath_kpartx_end"
# DM_SUBSYSTEM_UDEV_FLAG1 is the "skip_kpartx" flag.
# For events not generated by libdevmapper, we need to fetch it from db.
ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", IMPORT{db}="DM_SUBSYSTEM_UDEV_FLAG1"
ENV{DM_SUBSYSTEM_UDEV_FLAG1}=="1", GOTO="mpath_kpartx_end"
# 11-dm-mpath.rules sets MPATH_UNCHANGED for events that can be ignored.
ENV{MPATH_UNCHANGED}=="1", GOTO="mpath_kpartx_end"
# Don't run kpartx now if we know it will fail or hang.
ENV{DM_SUSPENDED}=="1", GOTO="mpath_kpartx_end"
ENV{DM_NOSCAN}=="1", GOTO="mpath_kpartx_end"
# Run kpartx
GOTO="run_kpartx"
LABEL="mpath_kpartx_end"
## Code for other subsystems (non-multipath) could be placed here ##
GOTO="kpartx_end"
LABEL="run_kpartx"
RUN+="/sbin/kpartx -un /dev/$name"
LABEL="kpartx_end"
11-dm-parts.rules 0000644 00000002642 15144730601 0007573 0 ustar 00 # Rules for partitions created by kpartx
KERNEL!="dm-*", GOTO="dm_parts_end"
ACTION!="add|change", GOTO="dm_parts_end"
ENV{DM_UUID}!="part[0-9]*", GOTO="dm_parts_end"
# We must take care that symlinks don't get lost,
# even if blkid fails in 13-dm-disk.rules later.
#
# Fixme: we have currently no way to avoid calling blkid on
# partitions of broken mpath maps such as DM_NOSCAN.
# But when partition devices appear, kpartx has likely read
# the partition table shortly before, so odds are not bad
# that blkid will also succeed.
IMPORT{db}="ID_FS_USAGE"
IMPORT{db}="ID_FS_UUID_ENC"
IMPORT{db}="ID_FS_LABEL_ENC"
IMPORT{db}="ID_PART_ENTRY_NAME"
IMPORT{db}="ID_PART_ENTRY_UUID"
IMPORT{db}="ID_PART_ENTRY_SCHEME"
# Maps should take precedence over their members.
ENV{DM_UDEV_LOW_PRIORITY_FLAG}!="1", OPTIONS+="link_priority=50"
# Set some additional symlinks that typically exist for mpath
# path members, too, and should be overridden.
#
# kpartx_id is very robust, it works for suspended maps and maps
# with 0 dependencies. It sets DM_TYPE, DM_PART, DM_WWN
IMPORT{program}=="kpartx_id %M %m $env{DM_UUID}"
# DM_TYPE only has a reasonable value for partitions on multipath.
ENV{DM_UUID}=="*-mpath-*", ENV{DM_TYPE}=="?*", ENV{DM_SERIAL}=="?*" \
SYMLINK+="disk/by-id/$env{DM_TYPE}-$env{DM_SERIAL}-part$env{DM_PART}"
ENV{DM_WWN}=="?*", ENV{DM_PART}=="?*", \
SYMLINK+="disk/by-id/wwn-$env{DM_WWN}-part$env{DM_PART}"
LABEL="dm_parts_end"
60-raw.rules 0000644 00000000506 15144730601 0006636 0 ustar 00 #
# Enter raw device bindings here.
#
# An example would be:
# ACTION=="add", KERNEL=="sda", RUN+="/usr/bin/raw /dev/raw/raw1 %N"
# to bind /dev/raw/raw1 to /dev/sda, or
# ACTION=="add", ENV{MAJOR}=="8", ENV{MINOR}=="1", RUN+="/usr/bin/raw /dev/raw/raw2 %M %m"
# to bind /dev/raw/raw2 to the device with major 8, minor 1.
80-net-setup-link.rules 0000644 00000000444 15144730601 0010727 0 ustar 00 # do not edit this file, it will be overwritten on update
SUBSYSTEM!="net", GOTO="net_setup_link_end"
IMPORT{builtin}="path_id"
ACTION!="add", GOTO="net_setup_link_end"
IMPORT{builtin}="net_setup_link"
NAME=="", ENV{ID_NET_NAME}!="", NAME="$env{ID_NET_NAME}"
LABEL="net_setup_link_end"
60-persistent-alsa.rules 0000644 00000001150 15144730601 0011157 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="persistent_alsa_end"
SUBSYSTEM!="sound", GOTO="persistent_alsa_end"
KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end"
SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
IMPORT{builtin}="path_id"
ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}"
LABEL="persistent_alsa_end"
98-kexec.rules 0000644 00000001267 15144730601 0007164 0 ustar 00 SUBSYSTEM=="cpu", ACTION=="add", GOTO="kdump_reload"
SUBSYSTEM=="cpu", ACTION=="remove", GOTO="kdump_reload"
SUBSYSTEM=="memory", ACTION=="online", GOTO="kdump_reload"
SUBSYSTEM=="memory", ACTION=="offline", GOTO="kdump_reload"
GOTO="kdump_reload_end"
LABEL="kdump_reload"
# If kdump is not loaded, calling kdump-udev-throttle will end up
# doing nothing, but systemd-run will always generate extra logs for
# each call, so trigger the kdump-udev-throttler only if kdump
# service is active to avoid unnecessary logs
RUN+="/bin/sh -c '/usr/bin/systemctl is-active kdump.service || exit 0; /usr/bin/systemd-run --quiet --no-block /usr/lib/udev/kdump-udev-throttler'"
LABEL="kdump_reload_end"
60-tpm-udev.rules 0000644 00000000323 15144730601 0007603 0 ustar 00 # tpm devices can only be accessed by the tss user but the tss
# group members can access tpmrm devices
KERNEL=="tpm[0-9]*", MODE="0660", OWNER="tss"
KERNEL=="tpmrm[0-9]*", MODE="0660", OWNER="tss", GROUP="tss"
13-dm-disk.rules 0000444 00000003402 15144730601 0007367 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
# Udev rules for device-mapper devices.
#
# These rules create symlinks in /dev/disk directory.
# Symlinks that depend on probing filesystem type,
# label and uuid are created only if the device is not
# suspended.
# "add" event is processed on coldplug only!
ACTION!="add|change", GOTO="dm_end"
ENV{DM_UDEV_RULES_VSN}!="?*", GOTO="dm_end"
ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="dm_end"
SYMLINK+="disk/by-id/dm-name-$env{DM_NAME}"
ENV{DM_UUID}=="?*", SYMLINK+="disk/by-id/dm-uuid-$env{DM_UUID}"
ENV{DM_SUSPENDED}=="1", GOTO="dm_end"
ENV{DM_NOSCAN}=="1", GOTO="dm_watch"
IMPORT{builtin}="blkid"
ENV{DM_UDEV_LOW_PRIORITY_FLAG}=="1", OPTIONS="link_priority=-100"
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_GPT_AUTO_ROOT}=="1", SYMLINK+="gpt-auto-root"
# Add inotify watch to track changes on this device.
# Using the watch rule is not optimal - it generates a lot of spurious
# and useless events whenever the device opened for read-write is closed.
# The best would be to generete the event directly in the tool changing
# relevant information so only relevant events will be processed
# (like creating a filesystem, changing filesystem label etc.).
#
# But let's use this until we have something better...
LABEL="dm_watch"
OPTIONS+="watch"
LABEL="dm_end"
70-nvmf-autoconnect.rules 0000644 00000002110 15144730601 0011325 0 ustar 00 #
# nvmf-autoconnect.rules:
# Handles udev events which invoke automatically scan via discovery
# controller and connect to elements in the discovery log.
#
#
# Events from persistent discovery controllers or nvme-fc transport events
# NVME_AEN:
# type 0x2 (NOTICE) info 0xf0 (DISCOVERY_LOG_CHANGE) log-page-id 0x70 (DISCOVERY_LOG_PAGE)
ACTION=="change", SUBSYSTEM=="nvme", ENV{NVME_AEN}=="0x70f002",\
ENV{NVME_TRTYPE}=="*", ENV{NVME_TRADDR}=="*", \
ENV{NVME_TRSVCID}=="*", ENV{NVME_HOST_TRADDR}=="*", \
RUN+="/bin/systemctl --no-block start nvmf-connect@--device=$kernel\t--transport=$env{NVME_TRTYPE}\t--traddr=$env{NVME_TRADDR}\t--trsvcid=$env{NVME_TRSVCID}\t--host-traddr=$env{NVME_HOST_TRADDR}.service"
# nvme-fc transport generated events (old-style for compatibility)
ACTION=="change", SUBSYSTEM=="fc", ENV{FC_EVENT}=="nvmediscovery", \
ENV{NVMEFC_HOST_TRADDR}=="*", ENV{NVMEFC_TRADDR}=="*", \
RUN+="/bin/systemctl --no-block start nvmf-connect@--device=none\t--transport=fc\t--traddr=$env{NVMEFC_TRADDR}\t--trsvcid=none\t--host-traddr=$env{NVMEFC_HOST_TRADDR}.service"
68-del-part-nodes.rules 0000644 00000002166 15144730601 0010677 0 ustar 00 # These rules can delete partitions devnodes for slave devices
# for certain aggregate devices such as multipath.
# This is desirable to avoid confusion and keep the number
# of device nodes and symlinks within limits.
#
# This is done only once on the first "add" or "change" event for
# any given device.
#
# To suppress this, use the kernel parameter "dont_del_part_nodes",
# or create an udev rule file that sets ENV{DONT_DEL_PART_NODES}="1".
SUBSYSTEM!="block", GOTO="end_del_part_nodes"
KERNEL!="sd*|dasd*", GOTO="end_del_part_nodes"
ACTION!="add|change", GOTO="end_del_part_nodes"
ENV{DEVTYPE}=="partition", GOTO="end_del_part_nodes"
IMPORT{cmdline}="dont_del_part_nodes"
ENV{dont_del_part_nodes}=="1", GOTO="end_del_part_nodes"
ENV{DONT_DEL_PART_NODES}=="1", GOTO="end_del_part_nodes"
# dm-multipath
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="del_part_nodes"
# Other aggregate device types can be added here.
GOTO="end_del_part_nodes"
LABEL="del_part_nodes"
IMPORT{db}="DM_DEL_PART_NODES"
ENV{DM_DEL_PART_NODES}!="1", ENV{DM_DEL_PART_NODES}="1", \
RUN+="/usr/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
LABEL="end_del_part_nodes"
60-fido-id.rules 0000644 00000000245 15144730601 0007360 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="fido_id_end"
SUBSYSTEM=="hidraw", IMPORT{program}="fido_id"
LABEL="fido_id_end"
71-nvmf-iopolicy-netapp.rules 0000644 00000000424 15144730601 0012126 0 ustar 00 # Enable round-robin for NetApp ONTAP and NetApp E-Series
ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{model}=="NetApp ONTAP Controller", ATTR{iopolicy}="round-robin"
ACTION=="add", SUBSYSTEM=="nvme-subsystem", ATTR{model}=="NetApp E-Series", ATTR{iopolicy}="round-robin"
60-evdev.rules 0000644 00000001716 15144730601 0007162 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="evdev_end"
KERNEL!="event*", GOTO="evdev_end"
# skip later rules when we find something for this input device
IMPORT{builtin}="hwdb --subsystem=input --lookup-prefix=evdev:", \
RUN{builtin}+="keyboard", GOTO="evdev_end"
# AT keyboard matching by the machine's DMI data
DRIVERS=="atkbd", \
IMPORT{builtin}="hwdb 'evdev:atkbd:$attr{[dmi/id]modalias}'", \
RUN{builtin}+="keyboard", GOTO="evdev_end"
# device matching the input device name + properties + the machine's DMI data
KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:phys:$attr{phys}:ev:$attr{capabilities/ev}:$attr{[dmi/id]modalias}'", \
RUN{builtin}+="keyboard", GOTO="evdev_end"
# device matching the input device name and the machine's DMI data
KERNELS=="input*", IMPORT{builtin}="hwdb 'evdev:name:$attr{name}:$attr{[dmi/id]modalias}'", \
RUN{builtin}+="keyboard", GOTO="evdev_end"
LABEL="evdev_end"
85-nm-unmanaged.rules 0000644 00000003735 15144730601 0010432 0 ustar 00 # Do not modify this file, it will get overwritten on updates.
# To override or extend the rules place a file in /etc/udev/rules.d
SUBSYSTEM!="net", GOTO="nm_unmanaged_end"
ACTION!="add|change|move", GOTO="nm_unmanaged_end"
# VirtualBox host networking. Out-of-tree driver that looks like an ordinary
# Ethernet. No parent device (lives in /virtual/), no support for ethtool
# to identify the driver, MAC address defaults to 08:00:27:, but can be
# changed. Interface name will have to do, it's always vboxnet*.
ENV{INTERFACE}=="vboxnet[0-9]*", ENV{NM_UNMANAGED}="1"
# VMWare host networking. Out-of-tree driver that looks like an ordinary
# Ethernet. No parent device (lives in /virtual/), no support for
# ethtool to identify the driver. They have their own MAC prefix that
# can not be changed.
ATTR{address}=="00:50:56:*", ENV{INTERFACE}=="vmnet[0-9]*", ENV{NM_UNMANAGED}="1"
# Parallels Workstation host networking. Out-of-tree driver that looks like
# an ordinary Ethernet. No parent device (lives in /virtual/), no support for
# ethtool to identify the driver and the interface name is too generic.
# However, they have their own MAC prefix that can not be changed.
ATTR{address}=="00:1c:42:*", ENV{INTERFACE}=="vnic[0-9]*", ENV{NM_UNMANAGED}="1"
# Virtual Ethernet device pair. Often used to communicate with a peer interface
# in another net namespace and managed by libvirt, Docker or the like.
# Generally we don't want to mess with those. One exception would be the
# full system containers, like LXC or LXD. LXC containers run via libvirt
# don't use udev, so this doesn't apply. LXD does, though. To deal with the
# LXD situation, let's treat the devices called eth* as regular ethernet.
ENV{ID_NET_DRIVER}=="veth", ENV{INTERFACE}!="eth[0-9]*", ENV{NM_UNMANAGED}="1"
# USB gadget device. Unmanage by default, since whatever created it
# might want to set it up itself (e.g. activate an ipv4.method=shared
# connection).
ENV{DEVTYPE}=="gadget", ENV{NM_UNMANAGED}="1"
LABEL="nm_unmanaged_end"
10-dm.rules 0000444 00000016142 15144730601 0006441 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
# Udev rules for device-mapper devices.
#
# These rules create a DM control node in /dev/mapper directory.
# The rules also create nodes named dm-x (x is a number) in /dev
# directory and symlinks to these nodes with names given by
# the actual DM names. Some udev environment variables are set
# for use in later rules:
# DM_NAME - actual DM device's name
# DM_UUID - UUID set for DM device (blank if not specified)
# DM_SUSPENDED - suspended state of DM device (0 or 1)
# DM_UDEV_RULES_VSN - DM udev rules version
#
# These rules cover only basic device-mapper functionality in udev.
#
# Various DM subsystems may contain further subsystem-specific rules
# in 11-dm-<subsystem_name>.rules which should be installed together
# with the DM subsystem and which extend these basic rules.
# For example:
# 11-dm-lvm.rules for LVM subsystem
# 11-dm-mpath.rules for multipath subsystem (since version 0.6.0, recommended!)
#
# Even more specific rules may be required by subsystems so always
# check subsystem's upstream repository for recent set of rules.
# Also, keep in mind that recent rules may also require recent
# subsystem-specific binaries.
KERNEL=="device-mapper", NAME="mapper/control"
SUBSYSTEM!="block", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
# Device created, major and minor number assigned - "add" event generated.
# Table loaded - no event generated.
# Device resumed (or renamed) - "change" event generated.
# Device removed - "remove" event generated.
#
# The dm-X nodes are always created, even on "add" event, we can't suppress
# that (the node is created even earlier with devtmpfs). All the symlinks
# (e.g. /dev/mapper) are created in right time after a device has its table
# loaded and is properly resumed. For this reason, direct use of dm-X nodes
# is not recommended.
ACTION!="add|change", GOTO="dm_end"
# Decode udev control flags and set environment variables appropriately.
# These flags are encoded in DM_COOKIE variable that was introduced in
# kernel version 2.6.31. Therefore, we can use this feature with
# kernels >= 2.6.31 only. Cookie is not decoded for remove event.
ENV{DM_COOKIE}=="?*", IMPORT{program}="/usr/sbin/dmsetup udevflags $env{DM_COOKIE}"
# Rule out easy-to-detect inappropriate events first.
ENV{DISK_RO}=="1", GOTO="dm_disable"
# There is no cookie set nor any flags encoded in events not originating
# in libdevmapper so we need to detect this and try to behave correctly.
# For such spurious events, regenerate all flags from current udev database content
# (this information would normally be inaccessible for spurious ADD and CHANGE events).
ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}=="1", ENV{DM_ACTIVATION}="1", GOTO="dm_flags_done"
IMPORT{db}="DM_UDEV_DISABLE_DM_RULES_FLAG"
IMPORT{db}="DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG"
IMPORT{db}="DM_UDEV_DISABLE_DISK_RULES_FLAG"
IMPORT{db}="DM_UDEV_DISABLE_OTHER_RULES_FLAG"
IMPORT{db}="DM_UDEV_LOW_PRIORITY_FLAG"
IMPORT{db}="DM_UDEV_DISABLE_LIBRARY_FALLBACK_FLAG"
IMPORT{db}="DM_UDEV_PRIMARY_SOURCE_FLAG"
IMPORT{db}="DM_UDEV_FLAG7"
IMPORT{db}="DM_UDEV_RULES_VSN"
LABEL="dm_flags_done"
# Normally, we operate on "change" events. But when coldplugging, there's an
# "add" event present. We have to recognize this and do our actions in this
# particular situation, too. Also, we don't want the nodes to be created
# prematurely on "add" events while not coldplugging. We check
# DM_UDEV_PRIMARY_SOURCE_FLAG to see if the device was activated correctly
# before and if not, we ignore the "add" event totally. This way we can support
# udev triggers generating "add" events (e.g. "udevadm trigger --action=add" or
# "echo add > /sys/block/<dm_device>/uevent"). The trigger with "add" event is
# also used at boot to reevaluate udev rules for all existing devices activated
# before (e.g. in initrd). If udev is used in initrd, we require the udev init
# script to not remove the existing udev database so we can reuse the information
# stored at the time of device activation in the initrd.
ACTION!="add", GOTO="dm_no_coldplug"
ENV{DM_UDEV_RULES_VSN}!="1", ENV{DM_UDEV_PRIMARY_SOURCE_FLAG}!="1", GOTO="dm_disable"
ENV{DM_ACTIVATION}="1"
LABEL="dm_no_coldplug"
# Putting it together, following table is used to recognize genuine and spurious events.
# N.B. Spurious events are generated based on use of the WATCH udev
# rule or by triggering an event manually by "udevadm trigger" call
# or by "echo <event_name> > /sys/block/dm-X/uevent".
#
# EVENT DM_UDEV_PRIMARY_SOURCE_FLAG DM_ACTIVATION
# ======================================================================
# add event (genuine) 0 0
# change event (genuine) 1 1
# add event (spurious)
# |_ dev still not active 0 0
# \_ dev already active 1 1
# change event (spurious)
# |_ dev still not active 0 0
# \_ dev already active 1 0
# "dm" sysfs subdirectory is available in newer versions of DM
# only (kernels >= 2.6.29). We have to check for its existence
# and use dmsetup tool instead to get the DM name, uuid and
# suspended state if the "dm" subdirectory is not present.
# The "suspended" item was added even later (kernels >= 2.6.31),
# so we also have to call dmsetup if the kernel version used
# is in between these releases.
TEST=="dm", ENV{DM_NAME}="$attr{dm/name}", ENV{DM_UUID}="$attr{dm/uuid}", ENV{DM_SUSPENDED}="$attr{dm/suspended}"
TEST!="dm", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o name,uuid,suspended"
ENV{DM_SUSPENDED}!="?*", IMPORT{program}="/usr/sbin/dmsetup info -j %M -m %m -c --nameprefixes --noheadings --rows -o suspended"
# dmsetup tool provides suspended state information in textual
# form with values "Suspended"/"Active". We translate it to
# 0/1 respectively to be consistent with sysfs values.
ENV{DM_SUSPENDED}=="Active", ENV{DM_SUSPENDED}="0"
ENV{DM_SUSPENDED}=="Suspended", ENV{DM_SUSPENDED}="1"
# This variable provides a reliable way to check that device-mapper
# rules were installed. It means that all needed variables are set
# by these rules directly so there's no need to acquire them again
# later. Other rules can alternate the functionality based on this
# fact (e.g. fallback to rules that behave correctly even without
# these rules installed). It also provides versioning for any
# possible future changes.
# VSN 1 - original rules
# VSN 2 - add support for synthesized events
ENV{DM_UDEV_RULES_VSN}="2"
ENV{DM_UDEV_DISABLE_DM_RULES_FLAG}!="1", ENV{DM_NAME}=="?*", SYMLINK+="mapper/$env{DM_NAME}"
# Avoid processing and scanning a DM device in the other (foreign)
# rules if it is in suspended state. However, we still keep 'disk'
# and 'DM subsystem' related rules enabled in this case.
ENV{DM_SUSPENDED}=="1", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1"
GOTO="dm_end"
LABEL="dm_disable"
ENV{DM_UDEV_DISABLE_SUBSYSTEM_RULES_FLAG}="1"
ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}="1"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}="1"
OPTIONS:="nowatch"
LABEL="dm_end"
95-dm-notify.rules 0000444 00000000743 15144730601 0007764 0 ustar 00 # Copyright (C) 2009 Red Hat, Inc. All rights reserved.
#
# This file is part of LVM2.
# Udev rules for device-mapper devices.
#
# These rules are responsible for sending a notification to a process
# waiting for completion of udev rules. The process is identified by
# a cookie value sent within "change" and "remove" events (the cookie
# value is set before by that process for every action requested).
ENV{DM_COOKIE}=="?*", RUN+="/usr/sbin/dmsetup udevcomplete $env{DM_COOKIE}"
80-libinput-device-groups.rules 0000644 00000000323 15144730601 0012444 0 ustar 00 ACTION!="add|change", GOTO="libinput_device_group_end"
KERNEL!="event[0-9]*", GOTO="libinput_device_group_end"
ATTRS{phys}=="?*", IMPORT{program}="libinput-device-group %S%p"
LABEL="libinput_device_group_end"
69-md-clustered-confirm-device.rules 0000644 00000001532 15144730601 0013336 0 ustar 00 # do not edit this file, it will be overwritten on update
SUBSYSTEM!="block", GOTO="clustermd_end"
# handle md arrays
KERNEL!="md*", GOTO="clustermd_end"
ENV{DEVTYPE}!="disk", GOTO="clustermd_end"
ACTION!="change", GOTO="clustermd_end"
ENV{EVENT}!="ADD_DEVICE", GOTO="clustermd_end"
ENV{DEVICE_UUID}!="?*", GOTO="clustermd_end"
ENV{RAID_DISK}!="?*", GOTO="clustermd_end"
# Based on the received UUID, node confirms the device if
# it is found by blkid, otherwise the node reports it is
# missing.
PROGRAM="/usr/sbin/blkid -o device -t UUID_SUB=$env{DEVICE_UUID}", ENV{.md.newdevice} = "$result"
ENV{.md.newdevice}!="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:$env{.md.newdevice}"
ENV{.md.newdevice}=="", RUN+="/usr/sbin/mdadm --manage $env{DEVNAME} --cluster-confirm $env{RAID_DISK}:missing"
LABEL="clustermd_end"
73-seat-late.rules 0000644 00000001174 15144730601 0007732 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="seat_late_end"
ENV{ID_SEAT}=="", ENV{ID_AUTOSEAT}=="1", ENV{ID_FOR_SEAT}!="", ENV{ID_SEAT}="seat-$env{ID_FOR_SEAT}"
ENV{ID_SEAT}=="", IMPORT{parent}="ID_SEAT"
ENV{ID_SEAT}!="", TAG+="$env{ID_SEAT}"
TAG=="uaccess", ENV{MAJOR}!="", RUN{builtin}+="uaccess"
LABEL="seat_late_end"
75-probe_mtd.rules 0000644 00000000256 15144730601 0010030 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION!="add", GOTO="mtd_probe_end"
KERNEL=="mtd*ro", IMPORT{program}="mtd_probe $devnode"
LABEL="mtd_probe_end"
73-idrac.rules 0000644 00000000474 15144730601 0007137 0 ustar 00 # do not edit this file, it will be overwritten on update
# On Dell PowerEdge systems, the iDRAC7 and later support a USB Virtual NIC
# with terminates in the iDRAC. Help identify this with 'idrac'
ACTION=="add", SUBSYSTEM=="net", SUBSYSTEMS=="usb", ATTRS{idVendor}=="413c", ATTRS{idProduct}=="a102", NAME="idrac"
91-drm-modeset.rules 0000644 00000000070 15144730601 0010265 0 ustar 00 KERNEL=="controlD[0-9]*", SUBSYSTEM=="drm", MODE="0600"
64-btrfs.rules 0000644 00000001150 15144730601 0007165 0 ustar 00 # do not edit this file, it will be overwritten on update
SUBSYSTEM!="block", GOTO="btrfs_end"
ACTION=="remove", GOTO="btrfs_end"
ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
ENV{SYSTEMD_READY}=="0", GOTO="btrfs_end"
# let the kernel know about this btrfs filesystem, and check if it is complete
IMPORT{builtin}="btrfs ready $devnode"
# mark the device as not ready to be used by the system
ENV{ID_BTRFS_READY}=="0", ENV{SYSTEMD_READY}="0"
# reconsider pending devices in case when multidevice volume awaits
ENV{ID_BTRFS_READY}=="1", RUN+="/usr/bin/udevadm trigger -s block -p ID_BTRFS_READY=0"
LABEL="btrfs_end"
50-udev-default.rules 0000644 00000007246 15144730601 0010441 0 ustar 00 # do not edit this file, it will be overwritten on update
# run a command on remove events
ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
ACTION=="remove", GOTO="default_end"
SUBSYSTEM=="virtio-ports", KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
# select "system RTC" or just use the first one
SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
SUBSYSTEM=="rtc", KERNEL=="rtc0", SYMLINK+="rtc", OPTIONS+="link_priority=-100"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
ENV{MODALIAS}!="", IMPORT{builtin}="hwdb --subsystem=$env{SUBSYSTEM}"
ACTION!="add", GOTO="default_end"
SUBSYSTEM=="tty", KERNEL=="ptmx", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty", GROUP="tty", MODE="0666"
SUBSYSTEM=="tty", KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="sclp_line[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="ttysclp[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="tty", KERNEL=="3270/tty[0-9]*", GROUP="tty", MODE="0620"
SUBSYSTEM=="vc", KERNEL=="vcs*|vcsa*", GROUP="tty"
KERNEL=="tty[A-Z]*[0-9]|ttymxc[0-9]*|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
SUBSYSTEM=="mem", KERNEL=="mem|kmem|port", GROUP="kmem", MODE="0640"
SUBSYSTEM=="input", GROUP="input"
SUBSYSTEM=="input", KERNEL=="js[0-9]*", MODE="0664"
SUBSYSTEM=="video4linux", GROUP="video"
SUBSYSTEM=="graphics", GROUP="video"
SUBSYSTEM=="drm", KERNEL!="renderD*", GROUP="video"
SUBSYSTEM=="dvb", GROUP="video"
SUBSYSTEM=="media", GROUP="video"
SUBSYSTEM=="cec", GROUP="video"
SUBSYSTEM=="drm", KERNEL=="renderD*", GROUP="render", MODE="0666"
SUBSYSTEM=="kfd", GROUP="render", MODE="0666"
SUBSYSTEM=="sound", GROUP="audio", \
OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
KERNEL=="parport[0-9]*", GROUP="lp"
SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
SUBSYSTEM=="ppdev", GROUP="lp"
KERNEL=="lp[0-9]*", GROUP="lp"
KERNEL=="irlpt[0-9]*", GROUP="lp"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
SUBSYSTEM=="block", GROUP="disk"
SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
KERNEL=="sch[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
KERNEL=="pktcdvd", GROUP="cdrom"
SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
KERNEL=="loop-control", GROUP="disk", OPTIONS+="static_node=loop-control"
KERNEL=="btrfs-control", GROUP="disk"
KERNEL=="rawctl", GROUP="disk"
SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
KERNEL=="rfkill", MODE="0664"
KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
KERNEL=="fuse", MODE="0666", OPTIONS+="static_node=fuse"
# The static_node is required on s390x and ppc (they are using MODULE_ALIAS)
KERNEL=="kvm", GROUP="kvm", MODE="0666", OPTIONS+="static_node=kvm"
SUBSYSTEM=="ptp", ATTR{clock_name}=="KVM virtual PTP", SYMLINK += "ptp_kvm"
SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv"
LABEL="default_end"
90-libinput-fuzz-override.rules 0000644 00000002116 15144730601 0012506 0 ustar 00 # Do not edit this file, it will be overwritten on update
#
# This file contains lookup rules for libinput model-specific quirks.
# IT IS NOT A STABLE API AND SUBJECT TO CHANGE AT ANY TIME
ACTION!="add|change", GOTO="libinput_fuzz_override_end"
KERNEL!="event*", GOTO="libinput_fuzz_override_end"
# Two-step process: fuzz-extract sets the LIBINPUT_FUZZ property and
# fuzz-to-zero sets the kernel fuzz to zero. They must be in IMPORT and RUN,
# respectively, to correctly interact with the 60-evdev.hwdb
#
# Drawback: if this rule is triggered more than once, we'll lose the fuzz
# information (because the kernel fuzz will then be zero). Nothing we can do
# about that.
ATTRS{capabilities/abs}!="0", \
ENV{ID_INPUT_TOUCHPAD}=="1", \
IMPORT{program}="libinput-fuzz-extract %S%p", \
RUN{program}+="libinput-fuzz-to-zero %S%p", \
GOTO="libinput_fuzz_override_end"
ATTRS{capabilities/abs}!="0", \
ENV{ID_INPUT_TOUCHSCREEN}=="1", \
IMPORT{program}="libinput-fuzz-extract %S%p", \
RUN{program}+="libinput-fuzz-to-zero %S%p", \
GOTO="libinput_fuzz_override_end"
LABEL="libinput_fuzz_override_end"
71-prefixdevname.rules 0000644 00000000623 15144730601 0010704 0 ustar 00 # Do not edit this file, it will be overwritten on updates
SUBSYSTEM!="net", GOTO="net_ifnames_prefix_end"
ACTION!="add", GOTO="net_ifnames_prefix_end"
ATTR{type}!="1", GOTO="net_ifnames_prefix_end"
IMPORT{cmdline}="net.ifnames.prefix"
ENV{net.ifnames.prefix}!="?*", GOTO="net_ifnames_prefix_end"
PROGRAM="/usr/lib/udev/prefixdevname", RESULT=="?*", NAME="$result"
LABEL="net_ifnames_prefix_end"
99-qemu-guest-agent.rules 0000644 00000000202 15144730601 0011242 0 ustar 00 SUBSYSTEM=="virtio-ports", ATTR{name}=="org.qemu.guest_agent.0", \
TAG+="systemd" ENV{SYSTEMD_WANTS}="qemu-guest-agent.service"
70-power-switch.rules 0000644 00000001070 15144730601 0010476 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="power_switch_end"
SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_SWITCH}=="1", TAG+="power-switch"
SUBSYSTEM=="input", KERNEL=="event*", ENV{ID_INPUT_KEY}=="1", TAG+="power-switch"
LABEL="power_switch_end"
63-fc-wwpn-id.rules 0000644 00000001160 15144730601 0010020 0 ustar 00 #
# FC WWPN-based by-path links
#
ACTION!="add|change", GOTO="fc_wwpn_end"
KERNEL!="sd*", GOTO="fc_wwpn_end"
ENV{DEVTYPE}=="disk", IMPORT{program}="fc_wwpn_id %p"
ENV{DEVTYPE}=="partition", IMPORT{parent}="FC_*"
ENV{FC_TARGET_WWPN}!="?*", GOTO="fc_wwpn_end"
ENV{FC_INITIATOR_WWPN}!="?*", GOTO="fc_wwpn_end"
ENV{FC_TARGET_LUN}!="?*", GOTO="fc_wwpn_end"
ENV{DEVTYPE}=="disk", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}"
ENV{DEVTYPE}=="partition", SYMLINK+="disk/by-path/fc-$env{FC_INITIATOR_WWPN}-$env{FC_TARGET_WWPN}-lun-$env{FC_TARGET_LUN}-part%n"
LABEL="fc_wwpn_end"
90-vconsole.rules 0000644 00000000776 15144730601 0007711 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# Each vtcon keeps its own state of fonts.
#
ACTION=="add", SUBSYSTEM=="vtconsole", KERNEL=="vtcon*", ATTR{name}!="*dummy device", RUN+="/usr/lib/systemd/systemd-vconsole-setup"
71-biosdevname.rules 0000644 00000001743 15144730601 0010347 0 ustar 00 SUBSYSTEM!="net", GOTO="netdevicename_end"
ACTION!="add", GOTO="netdevicename_end"
NAME=="?*", GOTO="netdevicename_end"
ATTR{type}!="1", GOTO="netdevicename_end"
ENV{DEVTYPE}=="?*", GOTO="netdevicename_end"
# kernel command line "biosdevname={0|1}" can turn off/on biosdevname
IMPORT{cmdline}="biosdevname"
ENV{biosdevname}=="?*", ENV{UDEV_BIOSDEVNAME}="$env{biosdevname}"
# ENV{UDEV_BIOSDEVNAME} can be used for blacklist/whitelist
# but will be overwritten by the kernel command line argument
ENV{UDEV_BIOSDEVNAME}=="0", GOTO="netdevicename_end"
ENV{UDEV_BIOSDEVNAME}=="1", GOTO="netdevicename_start"
# off by default
GOTO="netdevicename_end"
LABEL="netdevicename_start"
# using NAME= instead of setting INTERFACE_NAME, so that persistent
# names aren't generated for these devices, they are "named" on each boot.
SUBSYSTEMS=="pci", PROGRAM="/sbin/biosdevname --smbios 2.6 --nopirq --policy physical -i %k", NAME="%c" OPTIONS+="string_escape=replace"
LABEL="netdevicename_end"
75-net-description.rules 0000644 00000000704 15144730601 0011162 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="net_end"
SUBSYSTEM!="net", GOTO="net_end"
IMPORT{builtin}="net_id"
SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
SUBSYSTEMS=="usb", GOTO="net_end"
SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
LABEL="net_end"
84-nm-drivers.rules 0000644 00000001025 15144730601 0010136 0 ustar 00 # Do not modify this file, it will get overwritten on updates.
# To override or extend the rules place a file in /etc/udev/rules.d
SUBSYSTEM!="net", GOTO="nm_drivers_end"
ACTION!="add|change|move", GOTO="nm_drivers_end"
# Determine ID_NET_DRIVER if there's no ID_NET_DRIVER or DRIVERS (old udev?)
ENV{ID_NET_DRIVER}=="?*", GOTO="nm_drivers_end"
DRIVERS=="?*", GOTO="nm_drivers_end"
PROGRAM="/bin/sh -c '/usr/sbin/ethtool -i $$1 |/usr/bin/sed -n s/^driver:\ //p' -- $env{INTERFACE}", ENV{ID_NET_DRIVER}="%c"
LABEL="nm_drivers_end"
60-serial.rules 0000644 00000002246 15144730601 0007327 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="serial_end"
SUBSYSTEM!="tty", GOTO="serial_end"
SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
SUBSYSTEMS=="pci", IMPORT{builtin}="hwdb --subsystem=pci"
SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id", IMPORT{builtin}="hwdb --subsystem=usb"
# /dev/serial/by-path/, /dev/serial/by-id/ for USB devices
KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="serial_end"
SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}"
IMPORT{builtin}="path_id"
ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}"
ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
IMPORT{builtin}="usb_id"
ENV{ID_SERIAL}=="", GOTO="serial_end"
SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
ENV{ID_USB_INTERFACE_NUM}=="", GOTO="serial_end"
ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}"
ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}"
LABEL="serial_end"
71-seat.rules 0000644 00000005306 15144730601 0007006 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="seat_end"
TAG=="uaccess", SUBSYSTEM!="sound", TAG+="seat"
SUBSYSTEM=="sound", KERNEL=="card*", TAG+="seat"
SUBSYSTEM=="input", KERNEL=="input*", TAG+="seat"
SUBSYSTEM=="graphics", KERNEL=="fb[0-9]*", TAG+="seat", TAG+="master-of-seat"
SUBSYSTEM=="drm", KERNEL=="card[0-9]*", TAG+="seat", TAG+="master-of-seat"
SUBSYSTEM=="usb", ATTR{bDeviceClass}=="09", TAG+="seat"
# 'Plugable' USB hub, sound, network, graphics adapter
SUBSYSTEM=="usb", ATTR{idVendor}=="2230", ATTR{idProduct}=="000[13]", ENV{ID_AUTOSEAT}="1"
# qemu (version 2.4+) has a PCI-PCI bridge (-device pci-bridge-seat) to group
# devices belonging to one seat. See:
# http://git.qemu.org/?p=qemu.git;a=blob;f=docs/multiseat.txt
SUBSYSTEM=="pci", ATTR{vendor}=="0x1b36", ATTR{device}=="0x000a", TAG+="seat", ENV{ID_AUTOSEAT}="1"
# Mimo 720, with integrated USB hub, displaylink graphics, and e2i
# touchscreen. This device carries no proper VID/PID in the USB hub,
# but it does carry good ID data in the graphics component, hence we
# check it from the parent. There's a bit of a race here however,
# given that the child devices might not exist yet at the time this
# rule is executed. To work around this we'll trigger the parent from
# the child if we notice that the parent wasn't recognized yet.
# Match parent
SUBSYSTEM=="usb", ATTR{idVendor}=="058f", ATTR{idProduct}=="6254", \
ATTR{%k.2/idVendor}=="17e9", ATTR{%k.2/idProduct}=="401a", ATTR{%k.2/product}=="mimo inc", \
ENV{ID_AUTOSEAT}="1", ENV{ID_AVOID_LOOP}="1"
# Match child, look for parent's ID_AVOID_LOOP
SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \
ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \
IMPORT{parent}="ID_AVOID_LOOP"
# Match child, retrigger parent
SUBSYSTEM=="usb", ATTR{idVendor}=="17e9", ATTR{idProduct}=="401a", ATTR{product}=="mimo inc", \
ATTR{../idVendor}=="058f", ATTR{../idProduct}=="6254", \
ENV{ID_AVOID_LOOP}=="", \
RUN+="/usr/bin/udevadm trigger --parent-match=%p/.."
TAG=="seat", ENV{ID_PATH}=="", IMPORT{builtin}="path_id"
TAG=="seat", ENV{ID_FOR_SEAT}=="", ENV{ID_PATH_TAG}!="", ENV{ID_FOR_SEAT}="$env{SUBSYSTEM}-$env{ID_PATH_TAG}"
SUBSYSTEM=="input", ATTR{name}=="Wiebetech LLC Wiebetech", RUN+="/usr/bin/loginctl lock-sessions"
LABEL="seat_end"
60-alias-kmsg.rules 0000644 00000000545 15144730601 0010100 0 ustar 00 SUBSYSTEM!="block", GOTO="log_end"
KERNEL=="loop*|ram*", GOTO="log_end"
ACTION=="remove", GOTO="log_end"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="log_end"
ENV{DM_UDEV_DISABLE_DISK_RULES_FLAG}=="1", GOTO="log_end"
IMPORT{cmdline}="udev.alias"
ENV{udev.alias}=="1", RUN+="/bin/sh -c 'echo udev-alias: $name \($links\) > /dev/kmsg'"
LABEL="log_end"
40-usb-blacklist.rules 0000644 00000000711 15144730601 0010600 0 ustar 00 #
# Blacklist specific USB devices
#
# don't inquire sn and di on broken devices (https://bugzilla.suse.com/show_bug.cgi?id=840054)
ACTION!="add|change", GOTO="usb_blacklist_end"
KERNEL!="sd*[!0-9]|sr*", GOTO="usb_blacklist_end"
# unkown device
ATTRS{idVendor}=="0aec", ATTRS{idProduct}=="3260", ENV{ID_SCSI_INQUIRY}="1"
# Sony/JMicron port replicator
ATTRS{idVendor}=="054c", ATTRS{idProduct}=="06a0", ENV{ID_SCSI_INQUIRY}="1"
LABEL="usb_blacklist_end"
70-uaccess.rules 0000644 00000005157 15144730601 0007503 0 ustar 00 # SPDX-License-Identifier: LGPL-2.1+
#
# This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
ACTION=="remove", GOTO="uaccess_end"
ENV{MAJOR}=="", GOTO="uaccess_end"
# PTP/MTP protocol devices, cameras, portable media players
SUBSYSTEM=="usb", ENV{ID_USB_INTERFACES}=="*:060101:*", TAG+="uaccess"
# Digicams with proprietary protocol
ENV{ID_GPHOTO2}=="?*", TAG+="uaccess"
# SCSI and USB scanners
ENV{libsane_matched}=="yes", TAG+="uaccess"
# HPLIP devices (necessary for ink level check and HP tool maintenance)
ENV{ID_HPLIP}=="1", TAG+="uaccess"
# optical drives
SUBSYSTEM=="block", ENV{ID_CDROM}=="1", TAG+="uaccess"
SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", TAG+="uaccess"
# Sound devices
SUBSYSTEM=="sound", TAG+="uaccess", \
OPTIONS+="static_node=snd/timer", OPTIONS+="static_node=snd/seq"
# ffado is an userspace driver for firewire sound cards
SUBSYSTEM=="firewire", ENV{ID_FFADO}=="1", TAG+="uaccess"
# Webcams, frame grabber, TV cards
SUBSYSTEM=="video4linux", TAG+="uaccess"
SUBSYSTEM=="dvb", TAG+="uaccess"
# IIDC devices: industrial cameras and some webcams
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", TAG+="uaccess"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", TAG+="uaccess"
# AV/C devices: camcorders, set-top boxes, TV sets, audio devices, and more
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", TAG+="uaccess"
SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", TAG+="uaccess"
# DRI video devices
SUBSYSTEM=="drm", KERNEL=="card*", TAG+="uaccess"
# smart-card readers
ENV{ID_SMARTCARD_READER}=="?*", TAG+="uaccess"
# (USB) authentication devices
ENV{ID_SECURITY_TOKEN}=="?*", TAG+="uaccess"
# PDA devices
ENV{ID_PDA}=="?*", TAG+="uaccess"
# Programmable remote control
ENV{ID_REMOTE_CONTROL}=="1", TAG+="uaccess"
# joysticks
SUBSYSTEM=="input", ENV{ID_INPUT_JOYSTICK}=="?*", TAG+="uaccess"
# color measurement devices
ENV{COLOR_MEASUREMENT_DEVICE}=="?*", TAG+="uaccess"
# DDC/CI device, usually high-end monitors such as the DreamColor
ENV{DDC_DEVICE}=="?*", TAG+="uaccess"
# media player raw devices (for user-mode drivers, Android SDK, etc.)
SUBSYSTEM=="usb", ENV{ID_MEDIA_PLAYER}=="?*", TAG+="uaccess"
# software-defined radio communication devices
ENV{ID_SOFTWARE_RADIO}=="?*", TAG+="uaccess"
# 3D printers, CNC machines, laser cutters, 3D scanners, etc.
ENV{ID_MAKER_TOOL}=="?*", TAG+="uaccess"
LABEL="uaccess_end"
60-cdrom_id.rules 0000644 00000002057 15144730601 0007630 0 ustar 00 # do not edit this file, it will be overwritten on update
ACTION=="remove", GOTO="cdrom_end"
SUBSYSTEM!="block", GOTO="cdrom_end"
KERNEL!="sr[0-9]*|vdisk*|xvd*", GOTO="cdrom_end"
ENV{DEVTYPE}!="disk", GOTO="cdrom_end"
# unconditionally tag device as CDROM
KERNEL=="sr[0-9]*", ENV{ID_CDROM}="1"
# stop automatically any mount units bound to the device if the media eject
# button is pressed.
ENV{ID_CDROM}=="1", ENV{SYSTEMD_MOUNT_DEVICE_BOUND}="1"
# media eject button pressed
ENV{DISK_EJECT_REQUEST}=="?*", RUN+="cdrom_id --eject-media $devnode", GOTO="cdrom_end"
# import device and media properties and lock tray to
# enable the receiving of media eject button events
IMPORT{program}="cdrom_id --lock-media $devnode"
# ejecting a CD does not remove the device node, so mark the systemd device
# unit as inactive while there is no medium; this automatically cleans up of
# stale mounts after ejecting
ENV{DISK_MEDIA_CHANGE}=="?*", ENV{ID_CDROM_MEDIA}!="?*", ENV{SYSTEMD_READY}="0"
KERNEL=="sr0", SYMLINK+="cdrom", OPTIONS+="link_priority=-100"
LABEL="cdrom_end"
