PK b\W'�_� � . cloudlinux-latency-performance-cgv2/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimized Cloudlinux hosting Servers with cgroups v2 (NOT SUPPORTED YET)
include=cloudlinux-latency-performance-cgv1
#[bootloader]
#cmdline_parameter = cgroup_no_v1=all systemd.unified_cgroup_hierarchy=1
PK b\o�&�� � " cloudlinux-default-base/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Base CloudLinux hosting profile - NOT FOR DIRECT USE, use cloudlinux-default-cgv1 or cloudlinux-default-cgv2 instead
include=throughput-performance
[bootloader]
cmdline = cgroup.memory=nokmem
[cpu]
governor=performance
energy_perf_bias=performance
min_perf_pct=100
[vm]
transparent_hugepages=never
[sysctl]
kernel.numa_balancing = 1
#################
vm.dirty_ratio = 40
vm.dirty_background_ratio = 10
vm.swappiness=10
####
vm.zone_reclaim_mode=0
vm.oom_dump_tasks=0
####################3
# TCP fast open reduces network latency by enabling data exchange
# during the sender's initial TCP SYN. The value 3 enables fast open
# on client and server connections.
net.ipv4.tcp_fastopen=3
[disk-vm]
type=disk
devices = vd*
elevator = mq-deadline
[disk-sas]
type=disk
devices = sd*
elevator = mq-deadline
[disk-nvme]
type=disk
devices = nvme*
elevator = none
PK b\2S� � " cloudlinux-default-cgv1/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimized Cloudlinux hosting Servers with cgroups v1
include=cloudlinux-default-base
[bootloader]
cmdline_parameter = systemd.unified_cgroup_hierarchy=0 systemd.legacy_systemd_cgroup_controller
PK b\��q q " accelerator-performance/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Throughput performance based tuning with disabled higher latency STOP states
[cpu]
governor=performance
energy_perf_bias=performance
min_perf_pct=100
force_latency=99
[acpi]
platform_profile=performance
[disk]
readahead=>4096
[sysctl]
# If a workload mostly uses anonymous memory and it hits this limit, the entire
# working set is buffered for I/O, and any more write buffering would require
# swapping, so it's time to throttle writes until I/O can catch up. Workloads
# that mostly use file mappings may be able to use even higher values.
#
# The generator of dirty data starts writeback at this percentage (system default
# is 20%)
vm.dirty_ratio = 40
# Start background writeback (via writeback threads) at this percentage (system
# default is 10%)
vm.dirty_background_ratio = 10
# PID allocation wrap value. When the kernel's next PID value
# reaches this value, it wraps back to a minimum PID value.
# PIDs of value pid_max or larger are not allocated.
#
# A suggested value for pid_max is 1024 * <# of cpu cores/threads in system>
# e.g., a box with 32 cpus, the default of 32768 is reasonable, for 64 cpus,
# 65536, for 4096 cpus, 4194304 (which is the upper limit possible).
#kernel.pid_max = 65536
# The swappiness parameter controls the tendency of the kernel to move
# processes out of physical memory and onto the swap disk.
# 0 tells the kernel to avoid swapping processes out of physical memory
# for as long as possible
# 100 tells the kernel to aggressively swap processes out of physical memory
# and move them to swap cache
vm.swappiness=10
[scheduler]
# ktune sysctl settings for rhel6 servers, maximizing i/o throughput
#
# Minimal preemption granularity for CPU-bound tasks:
# (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds)
sched_min_granularity_ns = 10000000
# SCHED_OTHER wake-up granularity.
# (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds)
#
# This option delays the preemption effects of decoupled workloads
# and reduces their over-scheduling. Synchronous workloads will still
# have immediate wakeup/sleep latencies.
sched_wakeup_granularity_ns = 15000000
PK b\�ߦ
� � desktop/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for the desktop use-case
include=balanced
[sysctl]
kernel.sched_autogroup_enabled=1
PK b\�6� � � " cloudlinux-default-cgv2/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimized Cloudlinux hosting Servers with cgroups v2 (NOT SUPPORTED YET)
include=cloudlinux-default-cgv1
#[bootloader]
#cmdline_parameter = cgroup_no_v1=all systemd.unified_cgroup_hierarchy=1
PK b\�W�u u intel-sst/tuned.confnu �[��� [main]
summary=Configure for Intel Speed Select Base Frequency
[bootloader]
cmdline_intel_sst=-intel_pstate=disable
PK b\2�� � . cloudlinux-latency-performance-cgv1/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimized Cloudlinux hosting Servers with cgroups v1
include=cloudlinux-latency-performance-base
[bootloader]
cmdline_parameter = systemd.unified_cgroup_hierarchy=0 systemd.legacy_systemd_cgroup_controller
PK b\�B]�x x latency-performance/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for deterministic performance at the cost of increased power consumption
[cpu]
force_latency=cstate.id_no_zero:1|3
governor=performance
energy_perf_bias=performance
min_perf_pct=100
[acpi]
platform_profile=performance
[sysctl]
# If a workload mostly uses anonymous memory and it hits this limit, the entire
# working set is buffered for I/O, and any more write buffering would require
# swapping, so it's time to throttle writes until I/O can catch up. Workloads
# that mostly use file mappings may be able to use even higher values.
#
# The generator of dirty data starts writeback at this percentage (system default
# is 20%)
vm.dirty_ratio=10
# Start background writeback (via writeback threads) at this percentage (system
# default is 10%)
vm.dirty_background_ratio=3
# The swappiness parameter controls the tendency of the kernel to move
# processes out of physical memory and onto the swap disk.
# 0 tells the kernel to avoid swapping processes out of physical memory
# for as long as possible
# 100 tells the kernel to aggressively swap processes out of physical memory
# and move them to swap cache
vm.swappiness=10
[scheduler]
runtime=0
# ktune sysctl settings for rhel6 servers, maximizing i/o throughput
#
# Minimal preemption granularity for CPU-bound tasks:
# (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds)
sched_min_granularity_ns = 3000000
sched_wakeup_granularity_ns = 4000000
# The total time the scheduler will consider a migrated process
# "cache hot" and thus less likely to be re-migrated
# (system default is 500000, i.e. 0.5 ms)
sched_migration_cost_ns = 5000000
PK b\�UTv$ $ network-latency/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for deterministic performance at the cost of increased power consumption, focused on low latency network performance
include=latency-performance
[vm]
transparent_hugepages=never
[sysctl]
net.core.busy_read=50
net.core.busy_poll=50
net.ipv4.tcp_fastopen=3
kernel.numa_balancing=0
kernel.hung_task_timeout_secs = 600
kernel.nmi_watchdog = 0
vm.stat_interval = 10
kernel.timer_migration = 0
[bootloader]
cmdline_network_latency=skew_tick=1 tsc=reliable rcupdate.rcu_normal_after_boot=1
[rtentsk]
PK b\%�G# # virtual-host/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for running KVM guests
include=throughput-performance
[sysctl]
# Start background writeback (via writeback threads) at this percentage (system
# default is 10%)
vm.dirty_background_ratio = 5
[cpu]
# Setting C3 state sleep mode/power savings
force_latency=cstate.id_no_zero:3|70
[scheduler]
runtime=0
# The total time the scheduler will consider a migrated process
# "cache hot" and thus less likely to be re-migrated
# (system default is 500000, i.e. 0.5 ms)
sched_migration_cost_ns = 5000000
PK b\j�vDz z powersave/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for low power consumption
[cpu]
governor=ondemand|powersave
energy_perf_bias=powersave|power
energy_performance_preference=power
[acpi]
platform_profile=low-power|quiet
[eeepc_she]
[vm]
[audio]
timeout=10
[video]
radeon_powersave=dpm-battery, auto
[disk]
# Comma separated list of devices, all devices if commented out.
# devices=sda
[net]
# Comma separated list of devices, all devices if commented out.
# devices=eth0
[scsi_host]
alpm=min_power
[sysctl]
vm.laptop_mode=5
vm.dirty_writeback_centisecs=1500
kernel.nmi_watchdog=0
[script]
script=${i:PROFILE_DIR}/script.sh
PK b\�� } powersave/script.shnu ȯ�� #!/bin/bash
. /usr/lib/tuned/functions
start() {
[ "$USB_AUTOSUSPEND" = 1 ] && enable_usb_autosuspend
enable_wifi_powersave
return 0
}
stop() {
[ "$USB_AUTOSUSPEND" = 1 ] && disable_usb_autosuspend
disable_wifi_powersave
return 0
}
process $@
PK b\��#~� � . cloudlinux-latency-performance-base/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Base CloudLinux latency-performance profile - NOT FOR DIRECT USE, use cloudlinux-latency-performance-cgv1 or cloudlinux-latency-performance-cgv2 instead
include=throughput-performance
[bootloader]
cmdline = cgroup.memory=nokmem
[cpu]
governor=performance
energy_perf_bias=performance
min_perf_pct=100
# The alternation of CPU bound load and disk IO operations of postgresql
# db server suggest CPU to go into powersave mode.
#
# Explicitly disable deep c-states to reduce latency on OLTP workloads.
force_latency=1
[vm]
transparent_hugepages=never
[sysctl]
kernel.numa_balancing = 1
vm.dirty_ratio = 40
vm.dirty_background_ratio = 10
vm.swappiness=10
net.ipv4.tcp_window_scaling = 1
net.ipv4.tcp_timestamps = 1
# Increase kernel buffer size maximums. Currently this seems only necessary at 40Gb speeds.
#
# The buffer tuning values below do not account for any potential hugepage allocation.
# Ensure that you do not oversubscribe system memory.
#net.ipv4.tcp_rmem="4096 87380 16777216"
#net.ipv4.tcp_wmem="4096 16384 16777216"
##
# Busy polling helps reduce latency in the network receive path
# by allowing socket layer code to poll the receive queue of a
# network device, and disabling network interrupts.
# busy_read value greater than 0 enables busy polling. Recommended
# net.core.busy_read value is 50.
# busy_poll value greater than 0 enables polling globally.
# Recommended net.core.busy_poll value is 50
net.core.busy_read=50
net.core.busy_poll=50
# TCP fast open reduces network latency by enabling data exchange
# during the sender's initial TCP SYN. The value 3 enables fast open
# on client and server connections.
net.ipv4.tcp_fastopen=3
####
vm.zone_reclaim_mode=0
vm.oom_dump_tasks=0
[scheduler]
sched_min_granularity_ns = 10000000
sched_wakeup_granularity_ns = 15000000
[disk-vm]
type=disk
devices = vd*
elevator = mq-deadline
[disk-sas]
type=disk
devices = sd*
elevator = mq-deadline
[disk-nvme]
type=disk
devices = nvme*
elevator = none
readahead = 0
PK b\�y6� � balanced/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=General non-specialized tuned profile
[modules]
cpufreq_conservative=+r
[cpu]
priority=10
governor=conservative|powersave
energy_perf_bias=normal
energy_performance_preference=balance_performance
[acpi]
platform_profile=balanced
[audio]
timeout=10
[video]
radeon_powersave=dpm-balanced, auto
[disk]
# Comma separated list of devices, all devices if commented out.
# devices=sda
[scsi_host]
alpm=medium_power
PK b\�K)}b b ! throughput-performance/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Broadly applicable tuning that provides excellent performance across a variety of common server workloads
[variables]
thunderx_cpuinfo_regex=CPU part\s+:\s+(0x0?516)|(0x0?af)|(0x0?a[0-3])|(0x0?b8)\b
amd_cpuinfo_regex=model name\s+:.*\bAMD\b
[cpu]
governor=performance
energy_perf_bias=performance
min_perf_pct=100
energy_performance_preference=performance
[acpi]
platform_profile=performance
# Marvell ThunderX
[vm.thunderx]
type=vm
uname_regex=aarch64
cpuinfo_regex=${thunderx_cpuinfo_regex}
transparent_hugepages=never
[disk]
# The default unit for readahead is KiB. This can be adjusted to sectors
# by specifying the relevant suffix, eg. (readahead => 8192 s). There must
# be at least one space between the number and suffix (if suffix is specified).
readahead=>4096
[sysctl]
# If a workload mostly uses anonymous memory and it hits this limit, the entire
# working set is buffered for I/O, and any more write buffering would require
# swapping, so it's time to throttle writes until I/O can catch up. Workloads
# that mostly use file mappings may be able to use even higher values.
#
# The generator of dirty data starts writeback at this percentage (system default
# is 20%)
vm.dirty_ratio = 40
# Start background writeback (via writeback threads) at this percentage (system
# default is 10%)
vm.dirty_background_ratio = 10
# PID allocation wrap value. When the kernel's next PID value
# reaches this value, it wraps back to a minimum PID value.
# PIDs of value pid_max or larger are not allocated.
#
# A suggested value for pid_max is 1024 * <# of cpu cores/threads in system>
# e.g., a box with 32 cpus, the default of 32768 is reasonable, for 64 cpus,
# 65536, for 4096 cpus, 4194304 (which is the upper limit possible).
#kernel.pid_max = 65536
# The swappiness parameter controls the tendency of the kernel to move
# processes out of physical memory and onto the swap disk.
# 0 tells the kernel to avoid swapping processes out of physical memory
# for as long as possible
# 100 tells the kernel to aggressively swap processes out of physical memory
# and move them to swap cache
vm.swappiness=10
# The default kernel value 128 was over twenty years old default,
# kernel-5.4 increased it to 4096, thus do not have it lower than 2048
# on older kernels
net.core.somaxconn=>2048
[scheduler]
runtime=0
# ktune sysctl settings for rhel6 servers, maximizing i/o throughput
#
# Minimal preemption granularity for CPU-bound tasks:
# (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds)
sched_min_granularity_ns = 10000000
# SCHED_OTHER wake-up granularity.
# (default: 1 msec# (1 + ilog(ncpus)), units: nanoseconds)
#
# This option delays the preemption effects of decoupled workloads
# and reduces their over-scheduling. Synchronous workloads will still
# have immediate wakeup/sleep latencies.
sched_wakeup_granularity_ns = 15000000
# Marvell ThunderX
[sysctl.thunderx]
type=sysctl
uname_regex=aarch64
cpuinfo_regex=${thunderx_cpuinfo_regex}
kernel.numa_balancing=0
# AMD
[scheduler.amd]
type=scheduler
uname_regex=x86_64
cpuinfo_regex=${amd_cpuinfo_regex}
runtime=0
sched_migration_cost_ns=5000000
PK b\�蝀 � epyc-eda/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for EDA compute workloads on AMD EPYC CPUs
description=Configures virtual memory, CPU governors, and network settings for EDA compute workloads.
include=throughput-performance
# AMD
[scheduler.amd]
type=scheduler
#Allow processes to rapidly move between cores to avoid idle time and maximize CPU usage
sched_migration_cost_ns=10000
PK b\�o�t< t< functionsnu �[��� #
# This is library of helper functions that can be used in scripts in tuned profiles.
#
# API provided by this library is under heavy development and could be changed anytime
#
#
# Config
#
STORAGE=/run/tuned
STORAGE_PERSISTENT=/var/lib/tuned
STORAGE_SUFFIX=".save"
#
# Helpers
#
# Save value
# $0 STORAGE_NAME VALUE
save_value() {
[ "$#" -ne 2 ] && return
[ "$2" -a -e "${STORAGE}" ] && echo "$2" > "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Parse sysfs value, i.e. for "val1 [val2] val3" return "val2"
# $0 SYSFS_NAME
parse_sys() {
local V1 V2
[ -r "$1" ] || return
V1=`cat "$1"`
V2="${V1##*[}"
V2="${V2%%]*}"
echo "${V2:-$V1}"
}
# Save sysfs value
# $0 STORAGE_NAME SYSFS_NAME
save_sys() {
[ "$#" -ne 2 ] && return
[ -r "$2" -a ! -e "${STORAGE}/${1}${STORAGE_SUFFIX}" ] && parse_sys "$2" > "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Set sysfs value
# $0 SYSFS_NAME VALUE
set_sys() {
[ "$#" -ne 2 ] && return
[ -w "$1" ] && echo "$2" > "$1"
}
# Save and set sysfs value
# $0 STORAGE_NAME SYSFS_NAME VALUE
save_set_sys() {
[ "$#" -ne 3 ] && return
save_sys "$1" "$2"
set_sys "$2" "$3"
}
# Get stored sysfs value from storage
# $0 STORAGE_NAME
get_stored_sys() {
[ "$#" -ne 1 ] && return
[ -r "${STORAGE}/${1}${STORAGE_SUFFIX}" ] && cat "${STORAGE}/${1}${STORAGE_SUFFIX}"
}
# Restore value from storage
# $0 STORAGE_NAME
restore_value() {
[ "$#" -ne 1 ] && return
_rs_value="`get_stored_sys \"$1\"`"
unlink "${STORAGE}/${1}${STORAGE_SUFFIX}" >/dev/null 2>&1
[ "$_rs_value" ] && echo "$_rs_value"
}
# Restore sysfs value from storage, if nothing is stored, use VALUE
# $0 STORAGE_NAME SYSFS_NAME [VALUE]
restore_sys() {
[ "$#" -lt 2 -o "$#" -gt 3 ] && return
_rs_value="`get_stored_sys \"$1\"`"
unlink "${STORAGE}/${1}${STORAGE_SUFFIX}" >/dev/null 2>&1
[ "$_rs_value" ] || _rs_value="$3"
[ "$_rs_value" ] && set_sys "$2" "$_rs_value"
}
#
# DISK tuning
#
DISKS_DEV="$(command ls -d1 /dev/[shv]d*[a-z] 2>/dev/null)"
DISKS_SYS="$(command ls -d1 /sys/block/{sd,cciss,dm-,vd,dasd,xvd}* 2>/dev/null)"
_check_elevator_override()
{
/bin/fgrep -q 'elevator=' /proc/cmdline
}
# $0 OPERATOR DEVICES ELEVATOR
_set_elevator_helper() {
_check_elevator_override && return
SYS_BLOCK_SDX=""
[ "$2" ] && SYS_BLOCK_SDX=$(eval LANG=C /bin/ls -1 "${2}" 2>/dev/null)
# if there is no kernel command line elevator settings, apply the elevator
if [ "$1" -a "$SYS_BLOCK_SDX" ]; then
for i in $SYS_BLOCK_SDX; do
se_dev="`echo \"$i\" | sed 's|/sys/block/\([^/]\+\)/queue/scheduler|\1|'`"
$1 "elevator_${se_dev}" "$i" "$3"
done
fi
}
# $0 DEVICES ELEVATOR
set_elevator() {
_set_elevator_helper save_set_sys "$1" "$2"
}
# $0 DEVICES [ELEVATOR]
restore_elevator() {
re_elevator="$2"
[ "$re_elevator" ] || re_elevator=cfq
_set_elevator_helper restore_sys "$1" "$re_elevator"
}
# SATA Aggressive Link Power Management
# usage: set_disk_alpm policy
set_disk_alpm() {
policy=$1
for host in /sys/class/scsi_host/*; do
if [ -f $host/ahci_port_cmd ]; then
port_cmd=`cat $host/ahci_port_cmd`;
if [ $((0x$port_cmd & 0x240000)) = 0 -a -f $host/link_power_management_policy ]; then
echo $policy >$host/link_power_management_policy;
else
echo "max_performance" >$host/link_power_management_policy;
fi
fi
done
}
# usage: set_disk_apm level
set_disk_apm() {
level=$1
for disk in $DISKS_DEV; do
hdparm -B $level $disk &>/dev/null
done
}
# usage: set_disk_spindown level
set_disk_spindown() {
level=$1
for disk in $DISKS_DEV; do
hdparm -S $level $disk &>/dev/null
done
}
# usage: multiply_disk_readahead by
multiply_disk_readahead() {
by=$1
# float multiplication not supported in bash
# bc might not be installed, python is available for sure
for disk in $DISKS_SYS; do
control="${disk}/queue/read_ahead_kb"
old=$(cat $control)
new=$(echo "print int($old*$by)" | python)
(echo $new > $control) &>/dev/null
done
}
# usage: remount_disk options partition1 partition2 ...
remount_partitions() {
options=$1
shift
for partition in $@; do
mount -o remount,$options $partition >/dev/null 2>&1
done
}
remount_all_no_rootboot_partitions() {
[ "$1" ] || return
# Find non-root and non-boot partitions, disable barriers on them
rootvol=$(df -h / | grep "^/dev" | awk '{print $1}')
bootvol=$(df -h /boot | grep "^/dev" | awk '{print $1}')
volumes=$(df -hl --exclude=tmpfs | grep "^/dev" | awk '{print $1}')
nobarriervols=$(echo "$volumes" | grep -v $rootvol | grep -v $bootvol)
remount_partitions "$1" $nobarriervols
}
DISK_QUANTUM_SAVE="${STORAGE}/disk_quantum${STORAGE_SUFFIX}"
set_disk_scheduler_quantum() {
value=$1
rm -f "$DISK_QUANTUM_SAVE"
for disk in $DISKS_SYS; do
control="${disk}/queue/iosched/quantum"
echo "echo $(cat $control) > $control" >> "$DISK_QUANTUM_SAVE" 2>/dev/null
(echo $value > $control) &2>/dev/null
done
}
restore_disk_scheduler_quantum() {
if [ -r "$DISK_QUANTUM_SAVE" ]; then
/bin/bash "$DISK_QUANTUM_SAVE" &>/dev/null
rm -f "$DISK_QUANTUM_SAVE"
fi
}
#
# CPU tuning
#
CPUSPEED_SAVE_FILE="${STORAGE}/cpuspeed${STORAGE_SUFFIX}"
CPUSPEED_ORIG_GOV="${STORAGE}/cpuspeed-governor-%s${STORAGE_SUFFIX}"
CPUSPEED_STARTED="${STORAGE}/cpuspeed-started"
CPUSPEED_CFG="/etc/sysconfig/cpuspeed"
CPUSPEED_INIT="/etc/rc.d/init.d/cpuspeed"
# do not use cpuspeed
CPUSPEED_USE="0"
CPUS="$(ls -d1 /sys/devices/system/cpu/cpu* | sed 's;^.*/;;' | grep "cpu[0-9]\+")"
# set CPU governor setting and store the old settings
# usage: set_cpu_governor governor
set_cpu_governor() {
governor=$1
# always patch cpuspeed configuration if exists, if it doesn't exist and is enabled,
# explicitly disable it with hint
if [ -e $CPUSPEED_INIT ]; then
if [ ! -e $CPUSPEED_SAVE_FILE -a -e $CPUSPEED_CFG ]; then
cp -p $CPUSPEED_CFG $CPUSPEED_SAVE_FILE
sed -e 's/^GOVERNOR=.*/GOVERNOR='$governor'/g' $CPUSPEED_SAVE_FILE > $CPUSPEED_CFG
fi
else
if [ "$CPUSPEED_USE" = "1" ]; then
echo >&2
echo "Suggestion: install 'cpuspeed' package to get best tuning results." >&2
echo "Falling back to sysfs control." >&2
echo >&2
fi
CPUSPEED_USE="0"
fi
if [ "$CPUSPEED_USE" = "1" ]; then
service cpuspeed status &> /dev/null
[ $? -eq 3 ] && touch $CPUSPEED_STARTED || rm -f $CPUSPEED_STARTED
service cpuspeed restart &> /dev/null
# direct change using sysfs
elif [ -e /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
for cpu in $CPUS; do
gov_file=/sys/devices/system/cpu/$cpu/cpufreq/scaling_governor
save_file=$(printf $CPUSPEED_ORIG_GOV $cpu)
rm -f $save_file
if [ -e $gov_file ]; then
cat $gov_file > $save_file
echo $governor > $gov_file
fi
done
fi
}
# re-enable previous CPU governor settings
# usage: restore_cpu_governor
restore_cpu_governor() {
if [ -e $CPUSPEED_INIT ]; then
if [ -e $CPUSPEED_SAVE_FILE ]; then
cp -fp $CPUSPEED_SAVE_FILE $CPUSPEED_CFG
rm -f $CPUSPEED_SAVE_FILE
fi
if [ "$CPUSPEED_USE" = "1" ]; then
if [ -e $CPUSPEED_STARTED ]; then
service cpuspeed stop &> /dev/null
else
service cpuspeed restart &> /dev/null
fi
fi
if [ -e $CPUSPEED_STARTED ]; then
rm -f $CPUSPEED_STARTED
fi
else
CPUSPEED_USE="0"
fi
if [ "$CPUSPEED_USE" != "1" -a -e /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor ]; then
for cpu in $CPUS; do
cpufreq_dir=/sys/devices/system/cpu/$cpu/cpufreq
save_file=$(printf $CPUSPEED_ORIG_GOV $cpu)
if [ -e $cpufreq_dir/scaling_governor ]; then
if [ -e $save_file ]; then
cat $save_file > $cpufreq_dir/scaling_governor
rm -f $save_file
else
echo userspace > $cpufreq_dir/scaling_governor
cat $cpufreq_dir/cpuinfo_max_freq > $cpufreq_dir/scaling_setspeed
fi
fi
done
fi
}
_cpu_multicore_powersave() {
value=$1
[ -e /sys/devices/system/cpu/sched_mc_power_savings ] && echo $value > /sys/devices/system/cpu/sched_mc_power_savings
}
# enable multi core power savings for low wakeup systems
enable_cpu_multicore_powersave() {
_cpu_multicore_powersave 1
}
disable_cpu_multicore_powersave() {
_cpu_multicore_powersave 0
}
#
# MEMORY tuning
#
THP_ENABLE="/sys/kernel/mm/transparent_hugepage/enabled"
THP_SAVE="${STORAGE}/thp${STORAGE_SUFFIX}"
[ -e "$THP_ENABLE" ] || THP_ENABLE="/sys/kernel/mm/redhat_transparent_hugepage/enabled"
enable_transparent_hugepages() {
if [ -e $THP_ENABLE ]; then
cut -f2 -d'[' $THP_ENABLE | cut -f1 -d']' > $THP_SAVE
(echo always > $THP_ENABLE) &> /dev/null
fi
}
restore_transparent_hugepages() {
if [ -e $THP_SAVE ]; then
(echo $(cat $THP_SAVE) > $THP_ENABLE) &> /dev/null
rm -f $THP_SAVE
fi
}
#
# WIFI tuning
#
# usage: _wifi_set_power_level level
_wifi_set_power_level() {
# 0 auto, PM enabled
# 1-5 least savings and lowest latency - most savings and highest latency
# 6 disable power savings
level=$1
# do not report errors on systems with no wireless
[ -e /proc/net/wireless ] || return 0
# apply the settings using iwpriv
ifaces=$(cat /proc/net/wireless | grep -v '|' | sed 's@^ *\([^:]*\):.*@\1@')
for iface in $ifaces; do
iwpriv $iface set_power $level
done
# some adapters may rely on sysfs
for i in /sys/bus/pci/devices/*/power_level; do
(echo $level > $i) &> /dev/null
done
}
enable_wifi_powersave() {
_wifi_set_power_level 5
}
disable_wifi_powersave() {
_wifi_set_power_level 0
}
#
# BLUETOOTH tuning
#
disable_bluetooth() {
hciconfig hci0 down >/dev/null 2>&1
lsmod | grep -q btusb && rmmod btusb
}
enable_bluetooth() {
modprobe btusb
hciconfig hci0 up >/dev/null 2>&1
}
#
# USB tuning
#
_usb_autosuspend() {
value=$1
for i in /sys/bus/usb/devices/*/power/autosuspend; do echo $value > $i; done &> /dev/null
}
enable_usb_autosuspend() {
_usb_autosuspend 1
}
disable_usb_autosuspend() {
_usb_autosuspend 0
}
#
# SOUND CARDS tuning
#
enable_snd_ac97_powersave() {
save_set_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save Y
}
disable_snd_ac97_powersave() {
save_set_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save N
}
restore_snd_ac97_powersave() {
restore_sys ac97 /sys/module/snd_ac97_codec/parameters/power_save $1
}
set_hda_intel_powersave() {
save_set_sys hda_intel /sys/module/snd_hda_intel/parameters/power_save $1
}
restore_hda_intel_powersave() {
restore_sys hda_intel /sys/module/snd_hda_intel/parameters/power_save $1
}
#
# VIDEO CARDS tuning
#
# Power savings settings for Radeon
# usage: set_radeon_powersave dynpm | default | low | mid | high
set_radeon_powersave () {
[ "$1" ] || return
[ -e /sys/class/drm/card0/device/power_method ] || return
if [ "$1" = default -o "$1" = auto -o "$1" = low -o "$1" = med -o "$1" = high ]; then
[ -w /sys/class/drm/card0/device/power_profile ] || return
save_sys radeon_profile /sys/class/drm/card0/device/power_profile
save_set_sys radeon_method /sys/class/drm/card0/device/power_method profile
set_sys /sys/class/drm/card0/device/power_profile "$1"
elif [ "$1" = dynpm ]; then
save_sys radeon_profile /sys/class/drm/card0/device/power_profile
save_set_sys radeon_method /sys/class/drm/card0/device/power_method dynpm
fi
}
restore_radeon_powersave () {
restore_sys radeon_method /sys/class/drm/card0/device/power_method profile
_rrp_method="`get_stored_sys radeon_method`"
[ -z "$_rrp_method" -o _rrp_method="profile" ] && restore_sys radeon_profile /sys/class/drm/card0/device/power_profile default
}
#
# SOFTWARE tuning
#
RSYSLOG_CFG="/etc/rsyslog.conf"
RSYSLOG_SAVE="${STORAGE}/cpuspeed${STORAGE_SUFFIX}"
disable_logs_syncing() {
cp -p $RSYSLOG_CFG $RSYSLOG_SAVE
sed -i 's/ \/var\/log/-\/var\/log/' $RSYSLOG_CFG
}
restore_logs_syncing() {
mv -Z $RSYSLOG_SAVE $RSYSLOG_CFG || mv $RSYSLOG_SAVE $RSYSLOG_CFG
}
irqbalance_banned_cpus_clear() {
sed -i '/^IRQBALANCE_BANNED_CPUS=/d' /etc/sysconfig/irqbalance || return
if [ ${1:-restart} = restart ]; then
systemctl try-restart irqbalance
fi
}
irqbalance_banned_cpus_setup() {
irqbalance_banned_cpus_clear norestart
if [ -n "$1" ]; then
echo "IRQBALANCE_BANNED_CPUS=$1" >> /etc/sysconfig/irqbalance
fi
systemctl try-restart irqbalance
}
#
# HARDWARE SPECIFIC tuning
#
# Asus EEE with Intel Atom
_eee_fsb_control() {
value=$1
if [ -e /sys/devices/platform/eeepc/she ]; then
echo $value > /sys/devices/platform/eeepc/she
elif [ -e /sys/devices/platform/eeepc/cpufv ]; then
echo $value > /sys/devices/platform/eeepc/cpufv
elif [ -e /sys/devices/platform/eeepc-wmi/cpufv ]; then
echo $value > /sys/devices/platform/eeepc-wmi/cpufv
fi
}
eee_set_reduced_fsb() {
_eee_fsb_control 2
}
eee_set_normal_fsb() {
_eee_fsb_control 1
}
#
# modprobe configuration handling
#
kvm_modprobe_file=/etc/modprobe.d/kvm.rt.tuned.conf
teardown_kvm_mod_low_latency()
{
rm -f $kvm_modprobe_file
}
setup_kvm_mod_low_latency()
{
local HAS_KPS=""
local HAS_NX_HP=""
local HAS_PLE_GAP=""
local WANTS_KPS=""
local WANTS_NX_HP=""
local WANTS_PLE_GAP=""
modinfo -p kvm | grep -q kvmclock_periodic_sync && HAS_KPS=1
modinfo -p kvm | grep -q nx_huge_pages && HAS_NX_HP=1
modinfo -p kvm_intel | grep -q ple_gap && HAS_PLE_GAP=1
grep -qs kvmclock_periodic_sync "$kvm_modprobe_file" && WANTS_KPS=1
grep -qs nx_huge_pages "$kvm_modprobe_file" && WANTS_NX_HP=1
grep -qs ple_gap "$kvm_modprobe_file" && WANTS_PLE_GAP=1
if [ "$HAS_KPS" != "$WANTS_KPS" -o "$HAS_PLE_GAP" != "$WANTS_PLE_GAP" -o \
"$HAS_NX_HP" != "$WANTS_NX_HP" ]; then
teardown_kvm_mod_low_latency
[ "$HAS_KPS" ] && echo "options kvm kvmclock_periodic_sync=0" > $kvm_modprobe_file
[ "$HAS_NX_HP" ] && echo "options kvm nx_huge_pages=0" >> $kvm_modprobe_file
[ "$HAS_PLE_GAP" ] && echo "options kvm_intel ple_gap=0" >> $kvm_modprobe_file
fi
return 0
}
#
# KSM
#
KSM_SERVICES="ksm ksmtuned"
KSM_RUN_PATH=/sys/kernel/mm/ksm/run
KSM_MASK_FILE="${STORAGE_PERSISTENT}/ksm-masked"
disable_ksm()
{
if [ ! -f $KSM_MASK_FILE ]; then
# Always create $KSM_MASK_FILE, since we don't want to
# run any systemctl commands during boot
if ! touch $KSM_MASK_FILE; then
die "failed to create $KSM_MASK_FILE"
fi
# Do not run any systemctl commands if $KSM_SERVICES units do not exist
systemctl cat -- $KSM_SERVICES &> /dev/null || return 0
systemctl --now --quiet mask $KSM_SERVICES
# Unmerge all shared pages
test -f $KSM_RUN_PATH && echo 2 > $KSM_RUN_PATH
fi
}
# Should only be called when full_rollback == true
enable_ksm()
{
if [ -f $KSM_MASK_FILE ]; then
# Do not run any systemctl commands if $KSM_SERVICES units do not exist
systemctl cat -- $KSM_SERVICES &> /dev/null || return 0
if systemctl --quiet unmask $KSM_SERVICES; then
rm -f $KSM_MASK_FILE
fi
fi
}
die() {
echo "$@" >&2
exit 1
}
#
# ACTION PROCESSING
#
error_not_implemented() {
echo "tuned: script function '$1' is not implemented." >&2
}
# implicit actions, will be used if not provided by profile script:
#
# * start must be implemented
# * stop must be implemented
start() {
error_not_implemented start
return 16
}
stop() {
error_not_implemented stop
return 16
}
#
# main processing
#
process() {
ARG="$1"
shift
case "$ARG" in
start)
start "$@"
RETVAL=$?
;;
stop)
stop "$@"
RETVAL=$?
;;
verify)
if declare -f verify &> /dev/null;
then
verify "$@"
else
:
fi
RETVAL=$?
;;
*)
echo $"Usage: $0 {start|stop|verify}"
RETVAL=2
;;
esac
exit $RETVAL
}
PK b\+XQ�i i recommend.d/50-tuned.confnu �[��� # Tuned rules for recommend_profile.
#
# Syntax:
# [PROFILE1]
# KEYWORD11=RE11
# KEYWORD21=RE12
#
# [PROFILE2]
# KEYWORD21=RE21
# KEYWORD22=RE22
# KEYWORD can be:
# virt - for RE to match output of virt-what
# system - for RE to match content of /etc/system-release-cpe
# process - for RE to match running processes. It can have arbitrary
# suffix, all process* lines have to match for the PROFILE
# to match (i.e. the AND operator)
# /FILE - for RE to match content of the FILE, e.g.:
# '/etc/passwd=.+'. If file doesn't exist, its RE will not
# match.
# chassis_type - for RE to match the chassis type as reported by dmidecode
# syspurpose_role - for RE to match the system role as reported by syspurpose
# All REs for all KEYWORDs have to match for PROFILE to match (i.e. the AND operator).
# If 'virt' or 'system' is not specified, it matches for every string.
# If 'virt' or 'system' is empty, i.e. 'virt=', it matches only empty string (alias for '^$').
# If several profiles matched, the first match is taken.
#
# Limitation:
# Each profile can be specified only once, because there cannot be
# multiple sections in the configuration file with the same name
# (ConfigObj limitation).
# If there is a need to specify the profile multiple times, unique
# suffix like ',ANYSTRING' can be used. Everything after the last ','
# is stripped by the parser, e.g.:
#
# [balanced,1]
# /FILE1=RE1
#
# [balanced,2]
# /FILE2=RE2
#
# This will set 'balanced' profile in case there is FILE1 matching RE1 or
# FILE2 matching RE2 or both.
[atomic-host]
virt=
syspurpose_role=.*atomic.*
[atomic-guest]
virt=.+
syspurpose_role=.*atomic.*
[virtual-guest]
virt=.+
[balanced]
syspurpose_role=(.*(desktop|workstation).*)|^$
chassis_type=.*(Notebook|Laptop|Portable).*
[throughput-performance]
PK b\ cloudlinux-dummynu ȯ�� PK b\�|$� � cloudlinux-default/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=CloudLinux hosting profile (DEPRECATED: use cloudlinux-default-cgv1 or cloudlinux-default-cgv2 instead)
include=cloudlinux-default-cgv1
PK b\��� � " optimize-serial-console/tuned.confnu �[��� #
# tuned configuration
#
# This tuned configuration optimizes for serial console performance at the
# expense of reduced debug information to the console.
[main]
summary=Optimize for serial console use.
[sysctl]
kernel.printk="4 4 1 7"
PK b\ÆF�� � network-throughput/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for streaming network throughput, generally only necessary on older CPUs or 40G+ networks
include=throughput-performance
[sysctl]
# Increase kernel buffer size maximums. Currently this seems only necessary at 40Gb speeds.
#
# The buffer tuning values below do not account for any potential hugepage allocation.
# Ensure that you do not oversubscribe system memory.
net.ipv4.tcp_rmem="4096 131072 16777216"
net.ipv4.tcp_wmem="4096 16384 16777216"
PK b\��y� � virtual-guest/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for running inside a virtual guest
include=throughput-performance
[sysctl]
# If a workload mostly uses anonymous memory and it hits this limit, the entire
# working set is buffered for I/O, and any more write buffering would require
# swapping, so it's time to throttle writes until I/O can catch up. Workloads
# that mostly use file mappings may be able to use even higher values.
#
# The generator of dirty data starts writeback at this percentage (system default
# is 20%)
vm.dirty_ratio = 30
# Filesystem I/O is usually much more efficient than swapping, so try to keep
# swapping low. It's usually safe to go even lower than this on systems with
# server-grade storage.
vm.swappiness = 30
PK b\ ��� aws/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for aws ec2 instances
include=throughput-performance
# Marvell ThunderX
[bootloader.thunderx]
# rhbz:1836058
type=bootloader
uname_regex=aarch64
cmdline=+iommu.strict=0
[bootloader]
# https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/nvme-ebs-volumes.html#timeout-nvme-ebs-volumes
# set nvme_core.io_timeout to 4294967295
# https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/enhanced-networking-ena.html
# set net.ifnames to 0
cmdline=+net.ifnames=0 nvme_core.io_timeout=4294967295
PK b\9���I I cloudlinux-dummy/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Empty CloudLinux tuned profile
PK b\dx"E� � ) cloudlinux-latency-performance/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=CloudLinux latency-performance profile (DEPRECATED: use cloudlinux-latency-performance-cgv1 or cloudlinux-latency-performance-cgv2 instead)
include=cloudlinux-latency-performance-cgv1
PK b\���qp p hpc-compute/tuned.confnu �[��� #
# tuned configuration
#
[main]
summary=Optimize for HPC compute workloads
description=Configures virtual memory, CPU governors, and network settings for HPC compute workloads.
include=latency-performance
[vm]
# Most HPC application can take advantage of hugepages. Force them to on.
transparent_hugepages=always
[disk]
# Increase the readahead value to support large, contiguous, files.
readahead=>4096
[sysctl]
# Keep a reasonable amount of memory free to support large mem requests
vm.min_free_kbytes=135168
# Most HPC applications are NUMA aware. Enabling zone reclaim ensures
# memory is reclaimed and reallocated from local pages. Disabling
# automatic NUMA balancing prevents unwanted memory unmapping.
vm.zone_reclaim_mode=1
kernel.numa_balancing=0
# Busy polling helps reduce latency in the network receive path
# by allowing socket layer code to poll the receive queue of a
# network device, and disabling network interrupts.
# busy_read value greater than 0 enables busy polling. Recommended
# net.core.busy_read value is 50.
# busy_poll value greater than 0 enables polling globally.
# Recommended net.core.busy_poll value is 50
net.core.busy_read=50
net.core.busy_poll=50
# TCP fast open reduces network latency by enabling data exchange
# during the sender's initial TCP SYN. The value 3 enables fast open
# on client and server connections.
net.ipv4.tcp_fastopen=3
PK b\W'�_� � . cloudlinux-latency-performance-cgv2/tuned.confnu �[��� PK b\o�&�� � " U cloudlinux-default-base/tuned.confnu �[��� PK b\2S� � " / cloudlinux-default-cgv1/tuned.confnu �[��� PK b\��q q " n accelerator-performance/tuned.confnu �[��� PK b\�ߦ
� � 1 desktop/tuned.confnu �[��� PK b\�6� � � " � cloudlinux-default-cgv2/tuned.confnu �[��� PK b\�W�u u 8 intel-sst/tuned.confnu �[��� PK b\2�� � . � cloudlinux-latency-performance-cgv1/tuned.confnu �[��� PK b\�B]�x x H latency-performance/tuned.confnu �[��� PK b\�UTv$ $ network-latency/tuned.confnu �[��� PK b\%�G# # | virtual-host/tuned.confnu �[��� PK b\j�vDz z � powersave/tuned.confnu �[��� PK b\�� } �! powersave/script.shnu ȯ�� PK b\��#~� � . �" cloudlinux-latency-performance-base/tuned.confnu �[��� PK b\�y6� � @+ balanced/tuned.confnu �[��� PK b\�K)}b b ! L- throughput-performance/tuned.confnu �[��� PK b\�蝀 � �9 epyc-eda/tuned.confnu �[��� PK b\�o�t< t< �; functionsnu �[��� PK b\+XQ�i i ox recommend.d/50-tuned.confnu �[��� PK b\ !� cloudlinux-dummynu ȯ�� PK b\�|$� � a� cloudlinux-default/tuned.confnu �[��� PK b\��� � " `� optimize-serial-console/tuned.confnu �[��� PK b\ÆF�� � �� network-throughput/tuned.confnu �[��� PK b\��y� � � virtual-guest/tuned.confnu �[��� PK b\ ��� � aws/tuned.confnu �[��� PK b\9���I I n� cloudlinux-dummy/tuned.confnu �[��� PK b\dx"E� � ) � cloudlinux-latency-performance/tuned.confnu �[��� PK b\���qp p =� hpc-compute/tuned.confnu �[��� PK
�
